| Issue |
Title |
| No 1 (2014) |
Mathematical models of growth deformation |
|
|
Dolganova O.Y., Lokhov V.A. |
| No 4 (2021) |
DETERMINATION OF THE STRESS STATE AND THE FORCE OF DEFORMATION OF BALL-SHAPED BILLETS IN A CLOSED MATRIX |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Abishkenov M.Z., Bukanov Z.U. |
| No 1 (2020) |
The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending |
|
|
Nemirovskii Y.V., Tikhonov S.V. |
| No 2 (2018) |
Modeling of dynamic behavior of reinforced cylindrical shells under elastic-plastic deformation of materials of composition components |
|
|
Yankovskii A.P. |
| No 2 (2023) |
STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Nogaev K.A., Bukanov Z.U. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 2 (2015) |
Experimental finding of dynamic deformation fields in metal and composite plates under impact |
|
|
Nikhamkin M.S., Voronov L.V., Bolotov B.P. |
| No 1 (2017) |
Strength computational and experimental analysis of turbojet fan case under the impact of a torn blade |
|
|
Kurteyev V.A., Burdyugov S.I., Inozemtsev A.A., Lomaev V.I., Mozerov B.G., Sokolovskiy M.I., Shatrov V.B. |
| No 1 (2024) |
VISCOPLASTIC DEFORMATION OF GRANULAR NICKEL ALLOY AT HIGH TEMPERATURES |
|
|
Abashev D.R., Bondar V.S., Dikovitsky P.O., Morozov S.V., Larionova O.E. |
| No 1 (2013) |
Numerical algorithm of solving the problem of large elastic-plastic deformation by FEM |
|
|
Davydov R.L., Sultanov L.U. |
| No 5 (2023) |
CRYSTAL PLASTICITY FINITE-ELEMENT SIMULATIONS FOR QUASISTATIC DEFORMATION OF POLYCRYSTALS IN TERMS OF EXPLICIT DYNAMICS |
|
|
Romanova V.A., Balokhonov R..., Borodina A., Shakhidzhanov V.S., Lychagin D.V., Emelianova E.S., Pisarev M. |
| No 1 (2019) |
Investigation of the behavior of cylindrical bodies under conditions of joint tension and torsion under disproportionate loading |
|
|
Kryukov A.A. |
| No 4 (2017) |
CRITICAL DYNAMICS OF LOCALIZED INSTABILITIES OF PLASTIC FLOW IN THE AL-MG ALLOY |
|
|
Efremov D.V., Oborin V.A., Uvarov S.V., Naimark O.B. |
| No 3 (2014) |
ROTATIONAL DEFORMATION MODE OF POROUS STRUCTURES |
|
|
Avdeenko A.M., Krupin Y.A., Pimenova N.A. |
| No 4 (2017) |
Experimental study of deformation properties of a bulk layer from plumbum balls under dynamic and quasistatic loading |
|
|
Bragov A.M., Konstantinov A.I., Kochetkov A.V., Modin I.A., Savikhin A.O. |
| No 1 (2020) |
The Refined Model of Viscoelastic-Plastic Deformation of Reinforced Cylindrical Shells |
|
|
Yankovskii A.P. |
| No 1 (2022) |
Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field |
|
|
Nikulin I.L., Demin V.A. |
| No 4 (2018) |
Determination of elastic and dissipative properties of concrete under dynamic deformation |
|
|
Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 4 (2016) |
Nucleation recrystallization mechanisms in metals at thermomechanical processing |
|
|
Kondratev N.S., Trusov P.V. |
| No 4 (2020) |
Research of the asymmetric rolling of workpieces |
|
|
Ashkeyev Z.A., Andreyachshenko V.A., Bukanov Z.U. |
| No 1 (2019) |
The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion |
|
|
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A. |
| No 1 (2018) |
Applied grinding model of a solid particle with a simple shape on impact with a hard surface |
|
|
Guryanov G.A., Abdeev B.M., Klimenko Y.A. |
| No 3 (2023) |
ON THE INFLUENCE OF THE MECHANICAL CHARACTERISTICS OF A THIN ADHESION LAYER ON THE COMPOSITE STRENGTH. PART 2. ELASTIC-plastic DEFORMATION |
|
|
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
| No 1 (2015) |
Investigation of surface plastic hardening anisotropy influence on residual stresses distribution in hollow and solid cylindrical specimens |
|
|
Radchenko V.P., Pavlov V.P., Saushkin M.N. |
| No 4 (2021) |
Elastic-plastic invariant of autowave plasticity |
|
|
Zuev L.B., Barannikova S.A., Gorbatenko V.V. |
| No 4 (2018) |
Dynamic deformation interaction of elements of the “drummer-gasket-reinforced concrete beam” system |
|
|
Sobyanin K.V., Shardakov I.N., Shestakov A.P., Glot I.O. |
| No 2 (2016) |
Special features of numerical simulation for elastic-plastic buckling of hemispherical shells under loading with the rigid indenter |
|
|
Bazhenov V.G., Demareva A.V., Zhestkov M.N., Kibets A.I. |
| No 4 (2020) |
Numerical analysis of the spherical bearing geometric configuration with antifriction layer made of different materials |
|
|
Adamov A.A., Kamenskih A.A., Pankova A.P. |
| No 1 (2018) |
Plastic deformation of materials sensitive to a type of stress state |
|
|
Bondar V.S., Abashev D.R. |
| No 2 (2023) |
DYNAMICS AND STABILITY OF KAPITSA'S TWO-LINK PENDULUM |
|
|
Belyaev A.K., Polyakova O.R., Tovstik T.P. |
| No 1 (2020) |
The Applied model of grinding a spherical solid particle with a direct impact on a non-deformable flat surface |
|
|
Guryanov G.A., Abdeev B.M. |
| No 1 (2015) |
Multilevel models of crystal plasticity and viscoplasticity in multiphase polycrystalline materials |
|
|
Kondratev N.S., Trusov P.V. |
| No 4 (2021) |
Multilevel model of polycrystals: application to assessing the effect of texture and grains misorientation on the critical deformation of the dynamic recrystallization initiation |
|
|
Kondratev N.S., Trusov P.V., Podsedertsev A.N. |
| No 4 (2018) |
Experimental Study of Short-Term Transient Creep of the Al/SiC Metal-Matrix Composite under Uniaxial Compression |
|
|
Smirnov S.V., Kryuchkov D.I., Nesterenko A.V., Berezin I.M., Vichuzhanin D.I. |
| No 4 (2016) |
Algorithms for numerical simulation of structures deformation and fracture within relations of damaged medium mechanics |
|
|
Gorokhov V.A., Kazakov D.A., Kapustin S.A., Churilov Y.A. |
| No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
| No 3 (2020) |
Limit states and safety factors under repeated loading |
|
|
Chernyavsky O.F., Chernyavsky A.O. |
| No 1 (2013) |
Simulation of the stress-strain state of thin composite coatings based on solutions of the plane problem of strain-gradient elasticity for a layer |
|
|
Lurie S.A., Solyaev Y.O., Rabinsky L.N., Kondratova Y.N., Volov M.I. |
| No 4 (2019) |
Experimental analysis of the effect of discrete aggregate on the bending stability of thin-walled cylindrical shells |
|
|
Petrov M.V. |
| No 2 (2015) |
Simulation of stamping workpieces implants process using schemes of severe plastic deformation processes |
|
|
Tarasov A.F., Altukhov A.V., Sheikin S.E., Baitsar V.A. |
| No 4 (2021) |
Theories of plasticity under complex loading along spatial trajectories of deformations |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 4 (2016) |
Numerical analysis of dynamic strength of composite cylindrical shells under multiple-pulse exposures |
|
|
Abrosimov N.A., Elesin A.V. |
| No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
|
Artamonova N.B., Sheshenin S.V. |
| No 3 (2020) |
About the nonlinear acoustic parameter during deformation of AMG61 alloy |
|
|
Ilyahinsky A.V., Rodyushkin V.M. |
| No 1 (2013) |
Experimental study of Baushinger effect and yield surface at elastoplastic deformation of metals |
|
|
Zubchaninov V.G., Alekseev A.A., Gultyaev V.I. |
| No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 4 (2019) |
About a new approach to calculating spiral clamps |
|
|
Danilin A.N., Zhavoronok S.I., Rabinsky L.N. |
| No 4 (2018) |
Features of Deformation Behavior of Structural Steel during Forging |
|
|
Andreyachshenko V.A., Isheva Y.B. |
| No 3 (2020) |
Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation |
|
|
Wildemann V.E., Tretyakov M.P., Mugaratov A.I. |
| No 4 (2022) |
STABILITY OF POSTCRITICAL DEFORMATION DURING TORSION OF THICK-WALLED CYLINDRICAL SOLID |
|
|
Wildemann V.E., Mugatarov A.I. |
| No 4 (2019) |
Nonstationary 1D Dynamics Problems for Heteromodular Elasticity with Piecewise-Linear Approximation of Boundary Conditions |
|
|
Dudko O.V., Lapteva A.A., Ragozina V.E. |
| No 3 (2015) |
A grid method quantifying deformed Mg-alloys by Equal-Channel Angular Pressing |
|
|
Skryabina N.E., Aptukov V.N., Romanov P.V., Fruchart D. |
| No 3 (2021) |
ABOUT THE YIELD PLATEAU UNDER SIGN-VARIABLE LOADING |
|
|
Rychkov B.A., Goncharova I.V., Rezin P.M. |
| No 3 (2018) |
Review of experimental studies on structural superplasticity: internal structure evolution of material and deformation mechanisms |
|
|
Sharifullina E.R., Shveykin A.I., Trusov P.V. |
| No 2 (2017) |
Modeling the dynamics of reinforced shallow shells made of nonlinear elastic materials |
|
|
Yankovskii A.P. |
| No 6 (2023) |
ANALYSIS OF THE INFLUENCE OF ALLOYING ADDITIONS ON THE STRUCTURE OF AL-LI ALLOYS AND DEFORMATION MECHANISMS UNDER SUPERPLASTIC CONDITIONS (AN ANALYTICAL REVIEW) |
|
|
Sharifullina E.R., Shveykin A.I., Trusov P.V. |
| No 3 (2020) |
Solving the problems of strength and destruction of materials and structural elements using a complex experimental-theoretical approach |
|
|
Bragov A.M., Konstantinov A.Y., Lomunov A.K., Basalin A.V. |
| No 1 (2013) |
Estimation of the stress-strain state of the revolving long cylinder |
|
|
Boyarshinov M.G. |
| No 4 (2022) |
IDENTIFICATION OF THE IMPACT POSITION IN A REINFORCED CONCRETE STRUCTURE BASED ON THE ANALYSIS OF THE RESPONSE OF VIBRATION SENSORS |
|
|
Tsvetkov R.V., Shardakov I.N., Glot I.O., Gusev G.N., Yepin V.V., Shestakov A.P. |
| No 4 (2019) |
The Torsion Problem of a Cylindrical Solid Taking Into Account the Material Weakening |
|
|
Wildemann V.E., Mugatarov A.I. |
| No 1 (2016) |
Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression |
|
|
Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V. |
| No 3 (2021) |
The Applied mechanical and mathematical model of grinding of a solid particle by static crushing |
|
|
Guryanov G.A., Abdeev B.M., Baigereyev S.R., Kim V.A., Suleimenov A.D. |
| No 3 (2018) |
The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain |
|
|
Rekov A.M., Vichuzhanin D.I. |
| No 3 (2017) |
Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories |
|
|
Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. |
| No 2 (2020) |
The current state and tendencies of using rheological models for self-forming wooden structures |
|
|
Ponomarev V.S., Kashevarova G.G. |
| No 2 (2014) |
Mechanical properties of technical plasticine under static and dynamic loadings |
|
|
Sapozhnikov S.B., Ignatova A.V. |
| No 3 (2022) |
Study of deformation structures maps in metals under tension |
|
|
Barannikova S.A., Iskhakova P.V. |
| No 3 (2019) |
The Phenomenological Model of Hyper Viscoelasticity of Elastomers with a Constant Orientation of the Main Stress Axes in the Accompanying Frame of Reference |
|
|
Korneyev V.S., Korneyev S.A. |
| No 3 (2016) |
Evaluation of service life of heat-resistant alloys under cyclic thermomechanical loading |
|
|
Volkov I.A., Igumnov L.A. |
| No 3 (2021) |
Theories of plasticity under complex loading along flat trajectories of deformations |
|
|
Bondar V.S., Abashev D.R., Fomin D.J. |
| No 1 (2019) |
Mechanical behavior of X15CrNi12-2 structural steel under biaxial low-cycle fatigue at normal and elevated temperatures |
|
|
Lomakin E.V., Tretyakov M.P., Ilinykh A.V., Lykova A.V. |
| No 2 (2017) |
Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 4 (2023) |
MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS |
|
|
Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G. |
| No 2 (2020) |
The grain structure refinement of metals and alloys under severe plastic deformation: experimental data and analysis of mechanisms |
|
|
Ostanina T.V., Shveykin A.I., Trusov P.V. |
| No 3 (2014) |
ABOUT DRAWING OF THE YIELD SURFACE FOR STEEL 45 AND VERIFICATION OF THE POSTULATE OF ISOTROPY ON STRAIGHT-LINE PATHS DURING REPEATEDSIGN-VARIABLE LOADINGS |
|
|
Zubchaninov V.G., Alekseev A.A., Gultyaev V.I. |
| No 3 (2022) |
Memory surfaces separating the processes of monotonous and cyclic loads |
|
|
Bondar V.S., Abashev D.R. |
| No 3 (2019) |
Buckling Problem of Composite Thin-Walled Structures with Properties Dependent on Loading Types |
|
|
Fedorenko A.N., Fedulov B.N., Lomakin E.V. |
| No 3 (2016) |
Experimental study of deformation properties of a package of woven metal mesh under dynamic and quasi-static stressing |
|
|
Bragov A.M., Zhegalov D.V., Konstantinov A.Y., Kochetkov A.V., Modin I.A., Savikhin A.O. |
| No 3 (2021) |
STRESS STATE AND CONDITIONS FOR CRACK INITIATION IN THE ADHESION LAYER OF THE COMPOSITE |
|
|
Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
| No 3 (2017) |
Processing fine magnesium materials. Numerical simulation and experimental analyses |
|
|
Aptukov V.N., Romanov P.V., Skryabina N.E., Fruchart D. |
| No 4 (2023) |
STUDYING GRAPHENE ELECTROMECHANICAL BEHAVIOR BASED ON THE ELASTIC PLATES MOMENT-MEMBRANE THEORY |
|
|
Krylova E.Y., Sargsyan S.H. |
| No 2 (2020) |
Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression |
|
|
Aptukov V.N., Skryabina N.E., Fruchart D. |
| No 2 (2014) |
Mathematical modelling of deformation and damage accumulation under cyclic loading |
|
|
Bondar V.S., Danshin V.V., Makarov D.A. |
| No 2 (2022) |
Analysis of the limiting states of cylindrical elastic-plastic shells under tension and combined loading by internal pressure and tension |
|
|
Bazhenov V.G., Kazakov D.A., Osetrov S.L., Osetrov D.L., Ryabov A.A. |
| No 4 (2018) |
Generalized dynamic theory of a solid particle grinding by pulse-force compression with two non-deformable balls |
|
|
Abdeev B.M., Baigereyev S.R., Guryanov G.A. |
| No 1 (2016) |
Study of heat source evolution during elastic-plastic deformation of titanium alloy Ti-0.8Al-0.8Mn based on contact and non-contact measurements |
|
|
Iziumova A.Y., Vshivkov A.N., Prokhorov A.E., Plekhov O.A., Venkatraman B. |
| No 2 (2021) |
The deformation model of the DCB-sample with elastoplastic properties |
|
|
Glagolev V.V., Markin A.A. |
| No 1 (2019) |
Autowave mechanics of metal plasticity |
|
|
Zuev L.B., Barannikova S.A. |
| No 3 (2023) |
NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION |
|
|
Zaides S.A., Nguyen N.N. |
| No 1 (2020) |
The Refined Plane Mechanical and Mathematical Model Determining Stresses in the Base of the Strip Foundation and Elastic Sediment |
|
|
Abdeev B.M., Brim T.F., Muslimanova G. |
| No 1 (2022) |
The Simulation of the Nonlinear Consolidation of Porous Media |
|
|
Sheshenin S.V., Artamonova N.B. |
| No 4 (2018) |
Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading |
|
|
Poroshin V.B., Shlishevsky A.V. |
| No 3 (2016) |
A numerical study of stress-strain state evolution in structurally inhomogeneous materials subjected to uniaxial loading |
|
|
Smirnov S.V., Konovalov A.V., Myasnikova M.V., Khalevitsky Y.V., Smirnov A.S. |
| No 1 (2021) |
Studying Deformation Behaviors in Austenitic Stainless Steels within a Temperature Range of 143 K < T < 420 K |
|
|
Barannikova S.A., Nikonova A.M., Kolosov S.V. |
| No 1 (2019) |
Application of the Acoustic Emission Technique to Studying the Damage Accumulation in a Functional Ceramic Coating |
|
|
Zubova E.M., Lobanov D.S., Strungar E.M., Wildemann V.E., Lyamin Y.B. |
| No 3 (2023) |
DEVELOPMENT OF A METHOD FOR DESTROYING THE ROTOR BLADES OF A HIGH-PRESSURE COMPRESSOR AT A GIVEN FREQUENTATION OF ROTATION |
|
|
Gladkiy I.L., Pivovarova M.V. |
| No 4 (2014) |
Method of determining endurance limit stress of cylindrical specimens made of structural steels by residual stresses of “check test piece” |
|
|
Saushkin M.N., Sazanov V.P., Vakulyuk V.S. |
| 1 - 97 of 97 Items |
|
