| Issue |
Title |
| No 3 (2016) |
Static and dynamic analysis for 3D problems of linear magneto-electro-elasticity using BEM |
|
|
Markov I.P. |
| No 3 (2024) |
EXPERIMENTAL DETERMINATION OF CRACK-TIP FIELDS: HOLOGRAPHIC INTERFEROMETRY METHOD AND DIGITAL IMAGE CORRELATION METHOD |
|
|
Anisimov G.S., Stepanova L.V. |
| No 1 (2013) |
Finite element realization of geometrical immersion method on the basis of Kastilyano's variation principle for two-dimensional problem theory elasticity |
|
|
Trufanov N.A., Kuznetsova Y.S. |
| No 3 (2022) |
Vibrations of a strip with delamination in the framework of the one-parameter Aifantis model of gradient elasticity theory |
|
|
Vatulyan A.O., Yavruyan O.V. |
| No 3 (2021) |
The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings |
|
|
Sukhomlinov L.G., Shivrin M.V. |
| No 2 (2017) |
A shock loading on a bar with a central crack |
|
|
Malik A.V., Ryazantseva I.E., Lavit I.M. |
| No 4 (2015) |
Dynamics of flexible shaft in rigid tube |
|
|
Belyaev A.K., Eliseev V.V., Kalashnikov S.V. |
| No 1 (2016) |
Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression |
|
|
Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V. |
| No 1 (2023) |
SPECTRAL DYNAMIC STIFFNESS METHOD FOR THE FLUTTER PROBLEM OF COMBINED PLATES |
|
|
Papkov S.O., Papkova Y.I., Pasechnik V.A. |
| No 6 (2023) |
METHOD FOR CALCULATING RESONANCES OF ACOUSTIC STRESSES AT THE BOUNDARIES OF AN ANISOTROPIC LAYER |
|
|
Belyayev Y.N. |
| No 2 (2018) |
Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border |
|
|
Kamenev I.V., Semenov A.A. |
| No 4 (2023) |
APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS |
|
|
Chepurnenko A.S., Turina V.S. |
| No 4 (2022) |
REFINED DISCRETE METHOD FOR CALCULATING STIFFENED ORTHOTROPIC SHELLS |
|
|
Semenov A.A. |
| No 1 (2017) |
Nonlinear and coupled thermal effects during finite element simulation of contact thermo-force surface hardening |
|
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Ivannikov A.Y. |
| No 4 (2017) |
Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing |
|
|
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. |
| No 2 (2018) |
Numerical damping of oscillations of beams by using multiple point actuators |
|
|
Atamuratov A.Z., Mikhailov I.E., Taran N.A. |
| No 1 (2022) |
Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts |
|
|
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. |
| No 2 (2019) |
Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm |
|
|
Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. |
| No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
| No 4 (2021) |
Simultaneous identification of mechanical properties of functionally graded plates under the Kirchhoff and Tymoshenko models |
|
|
Bogachev I.V. |
| No 3 (2023) |
MODELING OF PRESTRESSED PLATES WITH MATERIAL INHOMOGENEITY, PERFORATIONS AND INCLUSIONS |
|
|
Bogachev I.V., Nedin R.D. |
| No 2 (2023) |
CALCULATION OF THE TOOL SHAPE FOR TUBE MIDDLE PART DISTRIBUTION BY RIGID MATRIX |
|
|
Bormotin K.S., Potianikhin D.A., Hlaing M.K., Sinelshchikov A.A. |
| No 2 (2016) |
Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes |
|
|
Kamenev I.V., Semenov A.A. |
| No 2 (2019) |
The Contact Problem Solution of the Elasticity Theory for Anisotropic Rotation Bodies with Mass Forces |
|
|
Ivanychev D.A. |
| No 1 (2015) |
NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY |
|
|
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I. |
| No 2 (2017) |
Thermoelasticity of a plane regular truss With orthogonal structure |
|
|
Rybakov L.S. |
| No 1 (2024) |
CALCULATION OF STATIC DEFORMATION OF AXISYMMETRIC SHELLS OF ROTATION WITH DIFFERENTIAL MODEL |
|
|
Nguyen C.M., Shelevaya D.R., Krasnorutskiy D.A. |
| No 4 (2018) |
The methodical Aspects of Strength, Deformation and Energy characteristic Determination of Salt Rocks under Direct Tensile Loading of Rock Specimens in Laboratory Conditions |
|
|
Asanov V.A., Pankov I.L., Kuzminyh V.S., Morozov I.A. |
| No 4 (2015) |
Natural vibrations of heated functionally graded cylindrical shells with fluid |
|
|
Bochkarev S.A., Lekomtsev S.V. |
| No 1 (2018) |
Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations |
|
|
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. |
| No 2 (2023) |
INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT |
|
|
Beliaev A.Y., Izyumov R.I., Svistkov A.L. |
| No 1 (2020) |
On modeling bodies with delaminating coatings taking into account the fields of prestresses |
|
|
Bogachev I.V., Vatulyan A.O. |
| No 1 (2014) |
Study of the stress state in composite plate near the connecting line edge depending on the thickness and material parameters of the connecting interlayer |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V., Polyanina E.A. |
| No 2 (2016) |
Separation process modeling of composite with adhesive layer |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 3 (2022) |
Low-cycle fatigue of V-notched cylindrical samples of bronze alloy |
|
|
Abashev D.R. |
| No 2 (2019) |
Hydroelastic stability of coaxial cylindrical shells made of piezoelectric material |
|
|
Bochkarev S.A., Lekomtsev S.V. |
| No 4 (2015) |
Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
| No 1 (2024) |
ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL |
|
|
Artamonova N.B., Sheshenin S.V. |
| No 3 (2021) |
Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells |
|
|
Kornievsky A.S., Nasedkin A.V. |
| No 4 (2018) |
Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors |
|
|
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. |
| No 2 (2018) |
Models of molecular dynamics: a review of EAM-potentials. Part 2. Potentials for multi-component systems |
|
|
Volegov P.S., Gerasimov R.M., Davlyatshin R.P. |
| No 1 (2023) |
ГЕНЕРАЦИЯ ПОВЕРХНОСТНЫХ АКУСТИЧЕСКИХ ВОЛН СЕГНЕТОЭЛЕКТРИЧЕСКОЙ ПЛЕНКОЙ BST ПРИ ДЕЙСТВИИ ОДНООСНОЙ НАГРУЗКИ |
|
|
Shirokov1 V.B., Timoshenko P.E., Kalinchuk V.V. |
| No 4 (2019) |
Identification of crack-like defect and investigation of stress concentration in coated bar |
|
|
Sobol B.V., Soloviev A.N., Rashidova E.V., Vasiliev P.V. |
| No 1 (2014) |
Influence of circular hole on the shell stress state for arbitrary Gaussian curvature |
|
|
Dovbnya E.N., Krupko N.A. |
| No 4 (2024) |
Experimental Study of Ultimate Deformation and Fracture of FRP with Stress Concentrators |
|
|
Strungar E.M., Lobanov D.S., Chebotareva E.A. |
| No 3 (2022) |
Postbuckling Behavior of Compressed Bars with Nonlinearly Elastic Supports |
|
|
Kayumov R.A. |
| No 2 (2019) |
Some Features of Monotonic and Cyclic Loadings. Experiment and Modeling |
|
|
Bondar V.S., Abashev D.R. |
| No 2 (2015) |
Experimental finding of dynamic deformation fields in metal and composite plates under impact |
|
|
Nikhamkin M.S., Voronov L.V., Bolotov B.P. |
| No 2 (2017) |
Modelling the generation of new material surfaces in a composite with an adhesion layer under cohesive destruction |
|
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
| No 1 (2024) |
STRESS-STRAIN STATE OF THIN-WALLED PIPE BLANKS DURING CRIMPING IN A CURVED AXISYMMETRIC MATRIX |
|
|
Andrianov I.K., Feoktistov S.I., Maryin S.B. |
| No 2 (2021) |
The Crack Growth in the Imitation Model of a GTE Turbine Disk under Operating Loading Conditions |
|
|
Yarullin R.R., Shlyannikov V.N., Sulamanidze A.G. |
| No 3 (2018) |
Finite element study of mixed mode loading of the cracked semicircular disc under bending |
|
|
Stepanova L.V., Frolov K.V. |
| No 2 (2018) |
Analysis of stress-strain state of dental implants by the boundary integral equations method |
|
|
Perelmuter M.N. |
| No 4 (2019) |
Determination of the critical velocity of the fluid flowing in a single-walled carbon nanotubes embedded in a polymer matrix |
|
|
Lolov D.S., Lilkova-Markova S.V. |
| No 1 (2014) |
Investigation of panel flutter of functionally graded circular cylindrical shells |
|
|
Bochkarev S.A., Lekomtsev S.V. |
| No 4 (2016) |
Experimental and numerical research of the dynamic response of composite outlet guide vane for aircraft jet engine |
|
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Shipunov G.S., Nikhamkin M.S., Balakirev A.A., Konev I.P., Golovkin A.Y. |
| No 4 (2024) |
Simulation of Fracture in Deformable Bodies with Stress Concentrators Taking into Account the Statistical Distribution of Ultimate Strength in Structural Elements |
|
|
Feklistova E.V., Mugatarov A.I., Wildemann V.E. |
| No 2 (2022) |
Solution of a mixed nonaxisymmetric problem of the theory of elasticity for anisotropic bodies of revolution |
|
|
Ivanychev D.A. |
| No 2 (2019) |
The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies |
|
|
Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. |
| No 3 (2015) |
A grid method quantifying deformed Mg-alloys by Equal-Channel Angular Pressing |
|
|
Skryabina N.E., Aptukov V.N., Romanov P.V., Fruchart D. |
| No 4 (2017) |
ESTIMATION OF CRACK PROPAGATION DIRECTION ANGLE UNDER MIXED-MODE LOADING (MODE I AND MODE II): GENERALIZED FRACTURE MECHANICS CRITERIA AND ATOMISTIC MODELING (MOLECULAR DYNAMICS METHOD) |
|
|
Stepanova L.V., Bronnikov S.A., Belova O.N. |
| No 6 (2023) |
METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING |
|
|
Karpov V.V., Semenov A.A. |
| No 2 (2021) |
The Computational Method of Estimating Vibration Stress Levels for GTE Compressor Blades |
|
|
Pivovarova M.V., Besschetnov V.A. |
| No 3 (2018) |
Construction of a Representative Model Based on Computed Tomography |
|
|
Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A. |
| No 4 (2016) |
Finite element investigation of the effectiveness of the tubular piezoelectric vibratory gyroscope depending on the type of polarization and boundary conditions |
|
|
Nasedkin A.V., Shprayzer E.I. |
| No 2 (2018) |
Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works |
|
|
Lyashenko I.A., Willert E., Popov V.L. |
| No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
|
Akhmetshin L.R., Smolin I.Y. |
| No 3 (2019) |
Simulation of residual stresses during pulsed thermo-force surface hardening |
|
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. |
| No 1 (2014) |
Mathematical modelling of vegetable oil plunger extraction |
|
|
Anferov S.D., Skul’skiy O.I., Slavnov E.V. |
| No 2 (2016) |
Manufacturing defects in composite flanges: modelling and analysis of influence on static strength |
|
|
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. |
| No 3 (2024) |
THE STATE OF STRESS AND DESTRUCTION OF AN ADHESIVE WHEN JOINING PLATES WITH A LAP |
|
|
B.E., Glagolev V.V., Glagolev L.V., Markin A.A. |
| No 2 (2022) |
Modelling the effect of vibrations on the surface tension of a liquid droplet using meshless methods |
|
|
Davlyatshin R.P., Perminov A.V., Bayandin Y.V., Saucedo-Zendejo F.R., Trushnikov D.N. |
| No 4 (2018) |
Elimination of a Rigid Body Oscillations Suspended on a Variable-Length Cable with a Controlled Horizontal Suspension Movement |
|
|
Russkikh S.V., Shklyarchuk F.N. |
| No 2 (2015) |
Research of influence of barrier crest on polymer extrusion process |
|
|
Ershov S.V., Chernyaev V.V. |
| No 3 (2017) |
The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength |
|
|
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G. |
| No 1 (2021) |
Contact problems for an inhomogeneous elastic wedge with variable Poisson’s ratio |
|
|
Pozharskii D.A., Pozharskaia E.D. |
| No 3 (2018) |
The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain |
|
|
Rekov A.M., Vichuzhanin D.I. |
| No 3 (2016) |
Normal and shear stresses estimation in deformed metals based on infrared thermography data |
|
|
Terekhina A.I., Kostina A.A., Plekhov O.A. |
| No 1 (2023) |
SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE |
|
|
Astapov N.S., Kurguzov V.D. |
| No 3 (2019) |
Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy |
|
|
Rogovoy A.A., Stolbova O.S. |
| No 2 (2013) |
Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images |
|
|
Tretyakova T.V., Spaskova E.M. |
| No 3 (2016) |
Dynamics of partially saturated poroelastic solids by boundary-element method |
|
|
Igumnov L.A., Petrov A.N. |
| No 1 (2022) |
The Simulation of the Nonlinear Consolidation of Porous Media |
|
|
Sheshenin S.V., Artamonova N.B. |
| No 4 (2018) |
Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading |
|
|
Poroshin V.B., Shlishevsky A.V. |
| No 2 (2015) |
Method of numerical calculation of optimal forms of bodies of revolution at movement in soil medium |
|
|
Bazhenov V.G., Kotov V.L., Linnik E.Y. |
| No 3 (2017) |
Stability of toroidal shell segments at variation of a deflection angle |
|
|
Bakusov P.A., Semenov A.A. |
| No 4 (2020) |
Finite element method with account of singularity for mixed mode cracks |
|
|
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. |
| No 1 (2019) |
The Research of the Mechanical Behavior of Elastically Transformable Composite Structures |
|
|
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. |
| No 4 (2016) |
Numerical analysis of poroviscoelastic prismatic solids and halfspaces dynamics via boundary element method |
|
|
Ipatov A.A., Belov A.A., Litvinchuk S.Y. |
| No 2 (2018) |
Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight |
|
|
Bityrin A.A. |
| No 3 (2019) |
The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading |
|
|
Nikitin A.D., Nikitin I.S., Stratula B.A. |
| No 2 (2014) |
Optimization of parameters of layered plates during dynamic hard indenter penetration with friction and weakining effect of free surfaces |
|
|
Aptukov V.N., Khasanov A.R. |
| No 2 (2024) |
MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM |
|
|
Velmisov P.A., Tamarova Y.A. |
| No 1 (2022) |
Calculation of the thermal conductivity coefficient of nanocrystals |
|
|
Severyukhin A.V., Severyukhina O.Y., Vakhrushev A.V. |
| No 4 (2018) |
Contact problems for an elastic inhomogeneous body with a cylindrical cavity |
|
|
Pozharskii D.A., Pozharskaya E.D. |
| No 4 (2015) |
ITERATIVE FINITE ELEMENT ALGORITHM and its implementation for STRESS STATE of structural elements with singular points |
|
|
Pestrenin V.M., Pestrenina I.V., Landik L.V. |
| No 4 (2023) |
ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE |
|
|
Kosov D.A., Fedorenkov D.I. |
| No 4 (2020) |
Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models |
|
|
Dolgikh D.A., Tashkinov M.A. |
| No 1 (2019) |
Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses |
|
|
Radchenko V.P., Pavlov V.P., Saushkin M.N. |
| No 3 (2016) |
Finite element analysis of biaxial cyclic tensile loading of elasto-plastic plate with central elliptical hole |
|
|
Turkova V.A., Stepanova L.V. |
| 1 - 100 of 144 Items |
1 2 > >> |
