Issue	Title
No 3 (2024)	EXPERIMENTAL DETERMINATION OF CRACK-TIP FIELDS: HOLOGRAPHIC INTERFEROMETRY METHOD AND DIGITAL IMAGE CORRELATION METHOD	Abstract (Rus)
Anisimov G.S., Stepanova L.V.
No 1 (2013)	Finite element realization of geometrical immersion method on the basis of Kastilyano's variation principle for two-dimensional problem theory elasticity	Abstract (Rus)
Trufanov N.A., Kuznetsova Y.S.
No 3 (2016)	Static and dynamic analysis for 3D problems of linear magneto-electro-elasticity using BEM	Abstract (Rus)
Markov I.P.
No 2 (2018)	Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border	Abstract (Rus)
Kamenev I.V., Semenov A.A.
No 6 (2023)	METHOD FOR CALCULATING RESONANCES OF ACOUSTIC STRESSES AT THE BOUNDARIES OF AN ANISOTROPIC LAYER	Abstract (Rus)
Belyayev Y.N.
No 4 (2023)	APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS	Abstract (Rus)
Chepurnenko A.S., Turina V.S.
No 4 (2022)	REFINED DISCRETE METHOD FOR CALCULATING STIFFENED ORTHOTROPIC SHELLS	Abstract (Rus)
Semenov A.A.
No 1 (2017)	Nonlinear and coupled thermal effects during finite element simulation of contact thermo-force surface hardening	Abstract (Rus)
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Ivannikov A.Y.
No 4 (2017)	Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing	Abstract (Rus)
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y.
No 2 (2018)	Numerical damping of oscillations of beams by using multiple point actuators	Abstract (Rus)
Atamuratov A.Z., Mikhailov I.E., Taran N.A.
No 1 (2022)	Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts	Abstract (Rus)
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V.
No 2 (2019)	Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm	Abstract (Rus)
Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A.
No 4 (2014)	Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G.
No 4 (2021)	Simultaneous identification of mechanical properties of functionally graded plates under the Kirchhoff and Tymoshenko models	Abstract (Rus)
Bogachev I.V.
No 3 (2023)	MODELING OF PRESTRESSED PLATES WITH MATERIAL INHOMOGENEITY, PERFORATIONS AND INCLUSIONS	Abstract (Rus)
Bogachev I.V., Nedin R.D.
No 2 (2023)	CALCULATION OF THE TOOL SHAPE FOR TUBE MIDDLE PART DISTRIBUTION BY RIGID MATRIX	Abstract (Rus)
Bormotin K.S., Potianikhin D.A., Hlaing M.K., Sinelshchikov A.A.
No 2 (2016)	Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes	Abstract (Rus)
Kamenev I.V., Semenov A.A.
No 3 (2022)	Vibrations of a strip with delamination in the framework of the one-parameter Aifantis model of gradient elasticity theory	Abstract (Rus)
Vatulyan A.O., Yavruyan O.V.
No 3 (2021)	The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings	Abstract (Rus)
Sukhomlinov L.G., Shivrin M.V.
No 2 (2017)	A shock loading on a bar with a central crack	Abstract (Rus)
Malik A.V., Ryazantseva I.E., Lavit I.M.
No 4 (2015)	Dynamics of flexible shaft in rigid tube	Abstract (Rus)
Belyaev A.K., Eliseev V.V., Kalashnikov S.V.
No 1 (2016)	Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression	Abstract (Rus)
Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V.
No 1 (2023)	SPECTRAL DYNAMIC STIFFNESS METHOD FOR THE FLUTTER PROBLEM OF COMBINED PLATES	Abstract (Rus)
Papkov S.O., Papkova Y.I., Pasechnik V.A.
No 2 (2018)	Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works	Abstract (Rus)
Lyashenko I.A., Willert E., Popov V.L.
No 6 (2023)	METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING	Abstract (Rus)
Karpov V.V., Semenov A.A.
No 2 (2021)	The Computational Method of Estimating Vibration Stress Levels for GTE Compressor Blades	Abstract (Rus)
Pivovarova M.V., Besschetnov V.A.
No 3 (2018)	Construction of a Representative Model Based on Computed Tomography	Abstract (Rus)
Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A.
No 4 (2016)	Finite element investigation of the effectiveness of the tubular piezoelectric vibratory gyroscope depending on the type of polarization and boundary conditions	Abstract (Rus)
Nasedkin A.V., Shprayzer E.I.
No 1 (2023)	PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION	Abstract (Rus)
Akhmetshin L.R., Smolin I.Y.
No 3 (2019)	Simulation of residual stresses during pulsed thermo-force surface hardening	Abstract (Rus)
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A.
No 1 (2014)	Mathematical modelling of vegetable oil plunger extraction	Abstract
Anferov S.D., Skul’skiy O.I., Slavnov E.V.
No 2 (2016)	Manufacturing defects in composite flanges: modelling and analysis of influence on static strength	Abstract (Rus)
Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V.
No 3 (2017)	The numerical model of dynamic mechanical behavior of brittle materials based on the concept of the kinetic theory of strength	Abstract (Rus)
Grigoriev A.S., Shilko E.V., Skripnyak V.A., Chernyavsky A.G., Psakhie S.G.
No 3 (2024)	THE STATE OF STRESS AND DESTRUCTION OF AN ADHESIVE WHEN JOINING PLATES WITH A LAP	Abstract (Rus)
B.E., Glagolev V.V., Glagolev L.V., Markin A.A.
No 2 (2022)	Modelling the effect of vibrations on the surface tension of a liquid droplet using meshless methods	Abstract (Rus)
Davlyatshin R.P., Perminov A.V., Bayandin Y.V., Saucedo-Zendejo F.R., Trushnikov D.N.
No 4 (2018)	Elimination of a Rigid Body Oscillations Suspended on a Variable-Length Cable with a Controlled Horizontal Suspension Movement	Abstract (Rus)
Russkikh S.V., Shklyarchuk F.N.
No 2 (2015)	Research of influence of barrier crest on polymer extrusion process	Abstract (Rus)
Ershov S.V., Chernyaev V.V.
No 1 (2021)	Contact problems for an inhomogeneous elastic wedge with variable Poisson’s ratio	Abstract (Rus)
Pozharskii D.A., Pozharskaia E.D.
No 3 (2018)	The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain	Abstract (Rus)
Rekov A.M., Vichuzhanin D.I.
No 3 (2016)	Normal and shear stresses estimation in deformed metals based on infrared thermography data	Abstract (Rus)
Terekhina A.I., Kostina A.A., Plekhov O.A.
No 1 (2023)	SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE	Abstract (Rus)
Astapov N.S., Kurguzov V.D.
No 3 (2019)	Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy	Abstract (Rus)
Rogovoy A.A., Stolbova O.S.
No 2 (2013)	Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images	Abstract (Rus)
Tretyakova T.V., Spaskova E.M.
No 3 (2016)	Dynamics of partially saturated poroelastic solids by boundary-element method	Abstract (Rus)
Igumnov L.A., Petrov A.N.
No 3 (2017)	Stability of toroidal shell segments at variation of a deflection angle	Abstract (Rus)
Bakusov P.A., Semenov A.A.
No 1 (2022)	The Simulation of the Nonlinear Consolidation of Porous Media	Abstract (Rus)
Sheshenin S.V., Artamonova N.B.
No 4 (2018)	Deformation and Strength Properties Prediction of Metals with Uniformly Distributed Closed Pores under Single and Cyclic Loading	Abstract (Rus)
Poroshin V.B., Shlishevsky A.V.
No 2 (2015)	Method of numerical calculation of optimal forms of bodies of revolution at movement in soil medium	Abstract (Rus)
Bazhenov V.G., Kotov V.L., Linnik E.Y.
No 2 (2018)	Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight	Abstract (Rus)
Bityrin A.A.
No 4 (2020)	Finite element method with account of singularity for mixed mode cracks	Abstract (Rus)
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V.
No 1 (2019)	The Research of the Mechanical Behavior of Elastically Transformable Composite Structures	Abstract (Rus)
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N.
No 4 (2016)	Numerical analysis of poroviscoelastic prismatic solids and halfspaces dynamics via boundary element method	Abstract (Rus)
Ipatov A.A., Belov A.A., Litvinchuk S.Y.
No 3 (2019)	The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading	Abstract (Rus)
Nikitin A.D., Nikitin I.S., Stratula B.A.
No 2 (2014)	Optimization of parameters of layered plates during dynamic hard indenter penetration with friction and weakining effect of free surfaces	Abstract (Rus)
Aptukov V.N., Khasanov A.R.
No 2 (2024)	MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM	Abstract (Rus)
Velmisov P.A., Tamarova Y.A.
No 1 (2022)	Calculation of the thermal conductivity coefficient of nanocrystals	Abstract (Rus)
Severyukhin A.V., Severyukhina O.Y., Vakhrushev A.V.
No 4 (2018)	Contact problems for an elastic inhomogeneous body with a cylindrical cavity	Abstract (Rus)
Pozharskii D.A., Pozharskaya E.D.
No 4 (2015)	ITERATIVE FINITE ELEMENT ALGORITHM and its implementation for STRESS STATE of structural elements with singular points	Abstract (Rus)
Pestrenin V.M., Pestrenina I.V., Landik L.V.
No 4 (2023)	ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE	Abstract (Rus)
Kosov D.A., Fedorenkov D.I.
No 4 (2020)	Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models	Abstract (Rus)
Dolgikh D.A., Tashkinov M.A.
No 1 (2019)	Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses	Abstract (Rus)
Radchenko V.P., Pavlov V.P., Saushkin M.N.
No 3 (2016)	Finite element analysis of biaxial cyclic tensile loading of elasto-plastic plate with central elliptical hole	Abstract (Rus)
Turkova V.A., Stepanova L.V.
No 4 (2022)	SECONDARY BUCKLING OF A HEATED CIRCULAR PLATE	Abstract (Rus)
Levyakov S.V.
No 3 (2019)	Inverse coefficient problems in mechanics	Abstract (Rus)
Vatulyan A.O., Plotnikov D.K.
No 3 (2014)	COMPARISON OF THE RESULTS OF SOLVING THE PROBLEM OF FRACTURE MECHANICS FOR PIPE WITH NON-THROUGH CRACK	Abstract (Rus)
Glushkov S.V., Skvortsov Y.V., Perov S.N.
No 1 (2017)	The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions	Abstract (Rus)
Astafurov S.V., Shilko E.V., Psakhie S.G.
No 4 (2017)	Models of molecular dynamics: a review of EAM potentials. Part 1: Potentials for single-component systems	Abstract (Rus)
Volegov P.S., Gerasimov R.M., Davlyatshin R.P.
No 2 (2024)	THE LIMITING STATE OF A STEEL STRUCTURE UNDER EXTREME THERMOMECHANICAL LOADINGS	Abstract (Rus)
Emel yanov I.G., Kislov A.N.
No 4 (2018)	Mechanics of collisions of solids: influence of friction and adhesion. II Numerical modeling	Abstract (Rus)
Lyashenko I.A., Willert E., Popov V.L.
No 3 (2015)	CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine	Abstract (Rus)
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S.
No 4 (2023)	INVESTIGATION OF THE ELECTRO-MAGNETO-ELASTIC STATE OF A FINITE MULTIPLY CONNECTED THIN PLATE	Abstract (Rus)
Kaloerov S.A., Seroshtanov A.V.
No 3 (2020)	About mixed forced, parametric and self-oscillations by limited excitation and delayed elasticity	Abstract (Rus)
Alifov A.A.
No 1 (2019)	Development of the Digital Image Correlation Method to Study Deformation and Fracture Processes of Structural Materials	Abstract (Rus)
Lyubutin P.S., Panin S.V., Titkov V.V., Eremin A.V., Sunder R.
No 4 (2016)	The influence of fluid filtration on the strength of porous fluid-saturated brittle materials	Abstract (Rus)
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G.
No 3 (2022)	Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures	Abstract (Rus)
Strungar E.M., Lobanov D.S.
No 1 (2017)	Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring	Abstract (Rus)
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A.
No 1 (2018)	Modelling the formation of new material surfaces during adhesive delamination of a composite	Abstract (Rus)
Glagolev V.V., Markin A.A., Fursaev A.A.
No 2 (2024)	Large Deflections, Loss of Stability and Over-Critical Behavior of Sloping Panels and Arches of Variable Thickness on an Elastic Base	Abstract (Rus)
Kayumov R.A.
No 1 (2022)	Finite element calculation of an elliptical cylinder in a geometrically nonlinear formulation using the vector form of the interpolation procedure	Abstract (Rus)
Klochkov Y.V., Dzhabrailov A.S., Ishchanov T.R., Marchenko S.S., Andreev A.S., Klochkov M.Y.
No 4 (2018)	Optimization of mechanical characteristics of models of laminate composites using embedded optical fiber strain sensors	Abstract (Rus)
Tashkinov M.A., Matveenko V.P.
No 3 (2015)	Mathematical modeling of development of beyond design basis accident in integral fast-neuron reactors vessel	Abstract (Rus)
Bazhenov V.G., Zhestkov M.N., Zamyatin V.A., Kibets A.I.
No 3 (2023)	NATURAL VIBRATIONS AND HYDROELASTIC STABILITY OF A PLATE WITH A PIEZOELECTRIC ELEMENT CONNECTED TO AN EXTERNAL RL-CIRCUIT	Abstract (Rus)
Lekomtsev S.V., Matveenko V.P., Senin A.N.
No 3 (2020)	Solving the problems of strength and destruction of materials and structural elements using a complex experimental-theoretical approach	Abstract (Rus)
Bragov A.M., Konstantinov A.Y., Lomunov A.K., Basalin A.V.
No 1 (2019)	The Effect of Preliminary Plastic Hardening by Tension on the Cylindrical Shells Buckling during Torsion	Abstract (Rus)
Bazhenov V.G., Zhegalov D.V., Kazakov D.A., Kibec A.I., Nagornykh E.V., Samsonova D.A.
No 3 (2016)	Non-stationary problems for elastic half-plane with moving point of changing boundary conditions	Abstract (Rus)
Tarlakovskii D.V., Fedotenkov G.V.
No 3 (2022)	Numerical simulation of the nickel alloy microstructure formed in the process of hot fogging	Abstract (Rus)
Rogovoy A.A., Salikhova N.K.
No 2 (2019)	Mixed Form Equations for Ribbed Shells of a General Type And Their Solutions	Abstract (Rus)
Karpov V.V.
No 1 (2015)	A two-level method for calculation of microstress on reinforced plates with circular hole in case of extension normal to principal direction	Abstract (Rus)
Darya zadeh S., Lvov G.I.
No 1 (2017)	Numerical investigation of a physically nonlinear problem of the longitudinal bending of the sandwich plate with a transversal-soft core	Abstract (Rus)
Badriev I.B., Makarov M.V., Paimushin V.N.
No 1 (2018)	ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE	Abstract (Rus)
Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V.
No 2 (2024)	COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS	Abstract (Rus)
Wildemann V.E., Mugatarov A.I., Khmelev A.A.
No 4 (2018)	Construction and analysis of finite-element models of inhomogeneous deformable solids based on scanning	Abstract (Rus)
Pykhalov A.A., Duong V.L., Tolstikov V.G.
No 4 (2015)	Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching	Abstract (Rus)
Zenkov E.V., Tsvik L.B.
No 1 (2020)	Two methods for calculating the stress-strain state of shape memory alloy constructions taking into account tension-compression asymmetry	Abstract (Rus)
Stolbova O.S., Tikhomirova K.A.
No 1 (2014)	The fatigue life-time propagation of the connection elements of long-term operated hydro turbines considering material degradation	Abstract
Larin O.O., Trubayev O.I., Vodka O.O.
No 2 (2016)	The method for analyzing mechanics of thin elastic rod systems using the differential approach	Abstract (Rus)
Krasnorutskiy D.A.
No 3 (2022)	Calculation of effective properties of geocomposites based on computed tomography images	Abstract (Rus)
Artamonova N.B., Sheshenin S.V., Orlov E.A., Bichen Z., Frolova J.V., Khamidullin I.R.
No 2 (2019)	An asymptotic Solution of the Hypersingular Boundary Integral Equation Simulating Wave Scattering by the Interface Strip-Like Crack	Abstract (Rus)
Doroshenko O.V., Kirillova E.V., Fomenko S.I.
No 2 (2015)	Features of strain localization in sylvinite under tension	Abstract (Rus)
Panteleev I.A., Plekhov O.A., Naimark O.B., Evseev A.V., Pankov I.L., Asanov V.A.
No 2 (2017)	Computing orthotropic constructions using the variation method based on three-dimensional functions with final carriers	Abstract (Rus)
Khayrullin F.S., Sakhbiev O.M.
1 - 100 of 144 Items	1 2 > >>

Search tips:

• Search terms are case-insensitive
• Common words are ignored
• By default only articles containing all terms in the query are returned (i.e., AND is implied)
• Combine multiple words with OR to find articles containing either term; e.g., education OR research
• Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
• Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
• Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
• Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"