| Issue | Title | Abstract | File |
| No 3 (2019) | Inverse coefficient problems in mechanics | Abstract |
 (Rus) |
| Vatulyan A.O., Plotnikov D.K. | |||
| No 4 (2020) | Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models | Abstract |
(Rus) |
| Dolgikh D.A., Tashkinov M.A. | |||
| No 2 (2014) | Investigation of influence of stress state parameters of fault zones on peculiarities of their mechanical response under shear loading | Abstract |
(Rus) |
| Astafurov S.V., Shilko E.V., Psakhie S.G. | |||
| No 2 (2020) | Investigation of nonlinearity of longitudinal displacement function from mechanical and geometric characteristics of the plate | Abstract |
(Rus) |
| Osadchy N.V., Malyshev V.A., Shepel V.T. | |||
| No 1 (2014) | Investigation of panel flutter of functionally graded circular cylindrical shells | Abstract | |
| Bochkarev S.A., Lekomtsev S.V. | |||
| No 1 (2015) | Investigation of surface plastic hardening anisotropy influence on residual stresses distribution in hollow and solid cylindrical specimens | Abstract |
(Rus) |
| Radchenko V.P., Pavlov V.P., Saushkin M.N. | |||
| No 1 (2019) | Investigation of the behavior of cylindrical bodies under conditions of joint tension and torsion under disproportionate loading | Abstract |
(Rus) |
| Kryukov A.A. | |||
| No 4 (2023) | INVESTIGATION OF THE ELECTRO-MAGNETO-ELASTIC STATE OF A FINITE MULTIPLY CONNECTED THIN PLATE | Abstract |
(Rus) |
| Kaloerov S.A., Seroshtanov A.V. | |||
| No 4 (2021) | Investigation of the features of crystallization of granules of high-strength aluminum alloys of the Al-Zn-Mg-Cu system at ultra-high cooling rates | Abstract |
(Rus) |
| Zharov M.V. | |||
| No 2 (2020) | Investigation of the mechanical behavior of a two-phase Mg-Ni compound during fast compression | Abstract |
(Rus) |
| Aptukov V.N., Skryabina N.E., Fruchart D. | |||
| No 4 (2023) | INVESTIGATION OF THE STABILITY OF FBG SENSOR MEASUREMENTS UNDER VARIOUS CLIMATIC CONDITIONS | Abstract |
(Rus) |
| Serovaev G.S., Kosheleva N.A. | |||
| No 4 (2021) | Investigation of the stress-strain state of a hollow cylinder with a coating based on the gradient model of thermoelasticity | Abstract |
(Rus) |
| Vatulyan A.O., Nesterov S.A., Yurov V.O. | |||
| No 4 (2020) | Investigation of the Winkler foundation model applicability for describing the contact interaction of elastoplastic shells with a core under external pressure | Abstract |
(Rus) |
| Bazhenov V.G., Nagornykh E.V., Samsonova D.A. | |||
| No 4 (2013) | Issledovanie mekhanizmov razrusheniya uglerodnykh kompozitsionnykh materialov na osnove mekhanicheskikh ispytaniy s registratsiey signalov akusticheskoy emissii | Abstract |
(Rus) |
| Shilova A.I., Vil'deman V.E., Lobanov D.S., Lyamin Y.B. | |||
| No 4 (2015) | ITERATIVE FINITE ELEMENT ALGORITHM and its implementation for STRESS STATE of structural elements with singular points | Abstract |
(Rus) |
| Pestrenin V.M., Pestrenina I.V., Landik L.V. | |||
| No 2 (2024) | Large Deflections, Loss of Stability and Over-Critical Behavior of Sloping Panels and Arches of Variable Thickness on an Elastic Base | Abstract |
(Rus) |
| Kayumov R.A. | |||
| No 1 (2019) | Lifetime of AMg6 Alloy under Consecutive Shock-Wave and Gigacycle Loading | Abstract |
(Rus) |
| Oborin V.A., Bannikov M.V., Bayandin Y.V., Naimark O.B. | |||
| No 3 (2020) | Limit states and safety factors under repeated loading | Abstract |
(Rus) |
| Chernyavsky O.F., Chernyavsky A.O. | |||
| No 4 (2018) | Load interaction effects during near-threshold fatigue crack growth under variable amplitude: theory, model, experiment | Abstract |
(Rus) |
| Savkin A.N., Sunder R., Denisevich D.S., Sedov A.A., Badikov K.A. | |||
| No 3 (2016) | Load-bearing capacity of ice weakened plates of curvilinear shape with variable thickness | Abstract |
(Rus) |
| Romanova T.P. | |||
| No 6 (2023) | LOCAL DAMAGES IN THE HIP JOINT ENDOPROSTHESIS FROM THE С/С COMPOSITE DURING OVERLOADS | Abstract |
(Rus) |
| Razumovskii E.S., Shavshukov V.E. | |||
| No 4 (2017) | Longitudinal resonance vibrations of the viscoelastic rod with a variable length | Abstract |
(Rus) |
| Anisimov V.N. | |||
| No 3 (2022) | Low-cycle fatigue of V-notched cylindrical samples of bronze alloy | Abstract |
(Rus) |
| Abashev D.R. | |||
| No 3 (2023) | MACHINE LEARNING METHOD IN ELASTIC PLATE TOPOLOGY OPTIMIZATION PROBLEMS | Abstract |
(Rus) |
| Avdonyushkin D.V., Matveeva A.I., Novokshenov A.D. | |||
| No 4 (2013) | Magnitoaktivnyy polimer s magnitotverdym napolnitelem | Abstract |
(Rus) |
| Stepanov G.V., Kramarenko E.Y., Perov N.S., Semisalova A.S., Borin D.Y., Bogdanov V.V., Semerenko D.A., Bakhtiyarov A.V., Sviridova L.D., Storozhenko P.A. | |||
| No 2 (2016) | Manufacturing defects in composite flanges: modelling and analysis of influence on static strength | Abstract |
(Rus) |
| Anoshkin A.N., Zuiko V.Y., Osokin V.M., Tretyakov A.A., Pisarev P.V. | |||
| No 3 (2013) | MATEMATIChESKAYa MODEL' KONVEKTsII NIKELEVOGO RASPLAVA PRI INDUKTsIONNOM PEREPLAVE. REShENIE MAGNITNOY PODZADAChI | Abstract |
(Rus) |
| Nikulin I.L., Perminov A.V. | |||
| No 3 (2013) | MATEMATIChESKOE MODELIROVANIE FAZOVYKh PREVRAShchENIY V STALYaKh PRI TERMOMEKhANIChESKOY NAGRUZKE | Abstract |
(Rus) |
| Isupova I.L., Trusov P.V. | |||
| No 3 (2013) | MATEMATIChESKOE MODELIROVANIE USTANOVIVShEYSYa FIL'TRATsII S MNOGOZNAChNYM ZAKONOM | Abstract |
(Rus) |
| Badriev I.B., Nechaeva L.A. | |||
| No 2 (2017) | Mathematical model and experimental studies of behavior of viscoelastic filled polymers under two-frequency loadings | Abstract |
(Rus) |
| Yankin A.S., Bulbovich R.V., Slovikov S.V. | |||
| No 3 (2014) | MATHEMATICAL MODEL OF MOVEMENT OF A PULSING LAYER OF VISCOUS LIQUID IN THE CHANNEL WITH AN ELASTIC WALL | Abstract |
(Rus) |
| Ageev R.V., Kuznetsova E.L., Kulikov N.I., Mogilevich L.I., Popov V.S. | |||
| No 1 (2022) | Mathematical model of oxide film deformation on the surface of a metallic melt in an alternating magnetic field | Abstract |
(Rus) |
| Nikulin I.L., Demin V.A. | |||
| No 1 (2018) | Mathematical model of pulse scanning of pressure along a piezo-electro-luminescent fiber-optical sensor | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 3 (2015) | Mathematical modeling of development of beyond design basis accident in integral fast-neuron reactors vessel | Abstract |
(Rus) |
| Bazhenov V.G., Zhestkov M.N., Zamyatin V.A., Kibets A.I. | |||
| No 4 (2016) | Mathematical modeling of piezo-electro-luminescent effect and diagnostics of pressure distribution along fiber optic sensor | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 3 (2021) | Mathematical modeling of relaxation of residual stresses in thin-walled pipelines in the delivery state and after bilateral surface hardening at creep | Abstract |
(Rus) |
| Radchenko V.P., Berbasova T.I., Tsvetkov V.V., Saushkin M.N. | |||
| No 2 (2024) | MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM | Abstract |
(Rus) |
| Velmisov P.A., Tamarova Y.A. | |||
| No 1 (2019) | Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses | Abstract |
(Rus) |
| Radchenko V.P., Pavlov V.P., Saushkin M.N. | |||
| No 2 (2014) | Mathematical modelling of deformation and damage accumulation under cyclic loading | Abstract |
(Rus) |
| Bondar V.S., Danshin V.V., Makarov D.A. | |||
| No 1 (2015) | Mathematical modelling of dynamics plastic forming of aft fairing in missile transformed during flight | Abstract |
(Rus) |
| Vetrov V.V., Dunaev V.A., Kostyanoi E.M., Mikheev K.N., Panferov P.V. | |||
| No 2 (2014) | Mathematical modelling of stratified flow of polymer melts in an axisymmetric formulation | Abstract |
(Rus) |
| Bachurina M.V., Kazakov A.V., Trufanova N.M. | |||
| No 1 (2014) | Mathematical modelling of vegetable oil plunger extraction | Abstract | |
| Anferov S.D., Skul’skiy O.I., Slavnov E.V. | |||
| No 1 (2014) | Mathematical models of growth deformation | Abstract | |
| Dolganova O.Y., Lokhov V.A. | |||
| No 2 (2018) | Mathematical models of nonlinear viscoelasticity with operators of fractional integro-differentiation | Abstract |
(Rus) |
| Ogorodnikov E.N., Radchenko V.P., Ungarova L.G. | |||
| No 2 (2023) | MECHANICAL BEHAVIOR OF POLYURETHANE COMPOSITES WITH NANOSIZED FILLERS | Abstract |
(Rus) |
| Mokhireva K.A., Svistkov A.L., Shadrin V.V., Sokolov A.K., Voznyakovskii A.P., Neverovskaya A.Y. | |||
| No 1 (2019) | Mechanical behavior of X15CrNi12-2 structural steel under biaxial low-cycle fatigue at normal and elevated temperatures | Abstract |
(Rus) |
| Lomakin E.V., Tretyakov M.P., Ilinykh A.V., Lykova A.V. | |||
| No 2 (2014) | Mechanical properties of technical plasticine under static and dynamic loadings | Abstract |
(Rus) |
| Sapozhnikov S.B., Ignatova A.V. | |||
| No 2 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. I. Review of experimental and theoretical works | Abstract |
(Rus) |
| Lyashenko I.A., Willert E., Popov V.L. | |||
| No 4 (2018) | Mechanics of collisions of solids: influence of friction and adhesion. II Numerical modeling | Abstract |
(Rus) |
| Lyashenko I.A., Willert E., Popov V.L. | |||
| No 4 (2013) | MEKhANIZMY NAChAL'NOGO RAZRUShENIYa ZhELEZOBETONNOY KREPI SFERIChESKOY GORNOY VYRABOTKI V MASSIVE OSADOChNYKh POROD | Abstract |
(Rus) |
| Zaytsev A.V., Sokolkin Y.V., Fukalov A.A. | |||
| No 1 (2024) | MEMORY DEPENDENT RESPONSE IN AN INFINITELY LONG THERMOELASTIC SOLID CIRCULAR CYLINDER | Abstract |
(Rus) |
| Lamba N.K., Deshmukh K.C. | |||
| No 3 (2022) | Memory surfaces separating the processes of monotonous and cyclic loads | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R. | |||
| No 4 (2018) | Method for calculating acoustic stresses in six-beam diffraction in layered media | Abstract |
(Rus) |
| Belyayev Y.N. | |||
| No 6 (2023) | METHOD FOR CALCULATING RESONANCES OF ACOUSTIC STRESSES AT THE BOUNDARIES OF AN ANISOTROPIC LAYER | Abstract |
(Rus) |
| Belyayev Y.N. | |||
| No 6 (2023) | METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING | Abstract |
(Rus) |
| Karpov V.V., Semenov A.A. | |||
| No 2 (2023) | METHOD FOR STUDYING THE POROSITY OF FLUID PHASE SAMPLES BY X-RAY COMPUTED TOMOGRAPHY UNDER UNIAXIAL COMPRESSION | Abstract |
(Rus) |
| Akifyev K.N., Statsenko E.O., Smirnova V.V., Kharin N.V., Bolshakov P.V., Sachenkov O.A. | |||
| No 1 (2013) | Method of calculating the surface and adhesion energies of elastic bodies | Abstract |
(Rus) |
| Frolenkova L.J., Shorkin V.S. | |||
| No 2 (2019) | Method of calculation of elastic effective properties of two-phase polydisperse media using multipoint statistical descriptors and the integral equations technique | Abstract |
(Rus) |
| Tashkinov M.A. | |||
| No 4 (2014) | Method of determining endurance limit stress of cylindrical specimens made of structural steels by residual stresses of “check test piece” | Abstract |
(Rus) |
| Saushkin M.N., Sazanov V.P., Vakulyuk V.S. | |||
| No 6 (2023) | METHOD OF ESTIMATING PLASTIC DEFORMATION DISTRIBUTIONS AT THE FATIGUE CRACK TIP BASED ON THE SOLUTION OF LINEAR ELASTICITY THEORY | Abstract |
(Rus) |
| Vshivkov A.N., Iziumova A.Y., Panteleev I.A., Plekhov O.A. | |||
| No 2 (2015) | Method of numerical calculation of optimal forms of bodies of revolution at movement in soil medium | Abstract |
(Rus) |
| Bazhenov V.G., Kotov V.L., Linnik E.Y. | |||
| No 4 (2016) | Methodology of numerical modelling of mechanical properties of the porous heat-shielding material based on ceramic fibers | Abstract |
(Rus) |
| Lurie S.A., Rabinsckiy L.N., Solyaev Y.O., Bouznik V.M., Lizunova D.V. | |||
| No 5 (2023) | METHODS AND RESULTS OF STUDYING THE PORTEVIN – LE CHATELIER EFFECT: EXPERIMENTS AND MACROPHENOMENOLOGICAL MODELS | Abstract |
(Rus) |
| Trusov P.V., Chechulina Е.А. | |||
| No 5 (2023) | METHODS AND RESULTS OF STUDYING THE PORTEVIN – LE CHATELIER EFFECT: PHYSICALLY-ORIENTED CONTINUOUS AND MULTILEVEL MODELS | Abstract |
(Rus) |
| Trusov P.V., Gerasimov R.M. | |||
| No 1 (2023) | METHODS FOR REDUCING NOTCH SENSITIVITY OF HYBRID PSEUDO-DUCTILE POLYMER COMPOSITES WITH FABRIC REINFORCEMENT: EXPERIMENTAL STUDY | Abstract |
(Eng) |
| Leshkov E.V., Olivenko N.A., Kudryavtsev O.A., Sapozhnikov S.B. | |||
| No 4 (2013) | Metodicheskie voprosy eksperimental'nykh issledovaniy vyazkouprugikh napolnennykh polimernykh kompozitov pri slozhnykh dinamicheskikh tsiklicheskikh vozdeystviyakh | Abstract |
(Rus) |
| Yankin A.S., Bul'bovich R.V., Slovikov S.V., Vil'deman V.E. | |||
| No 3 (2013) | Metody vychisleniy matrits perenosa uprugikh deformatsiy | Abstract |
(Rus) |
| Belyayev Y.N. | |||
| No 2 (2019) | Mixed Form Equations for Ribbed Shells of a General Type And Their Solutions | Abstract |
(Rus) |
| Karpov V.V. | |||
| No 3 (2014) | MIXED-MODE LOADING OF THE CRACKED PLATE UNDER PLANE STRESS CONDITIONS | Abstract |
(Rus) |
| Stepanova L.V., Yakovleva E.M. | |||
| No 3 (2022) | Modal analysis of a hydrogen-damaged pipe as shell inhomogeneous on thickness | Abstract |
(Rus) |
| Filippenko G.V., Zinovieva T.V. | |||
| No 4 (2013) | MODEL' DLYa OPISANIYa UPRUGOVYaZKOPLASTIChESKOGO DEFORMIROVANIYa GPU-KRISTALLOV: NESIMMETRIChNYE MERY NAPRYaZhENNO-DEFORMIROVANNOGO SOSTOYaNIYa, ZAKONY UPROChNENIYa | Abstract |
(Rus) |
| Matsyuk K.V., Trusov P.V. | |||
| No 3 (2013) | MODEL' FORMIROVANIYa OTKOLA | Abstract |
(Rus) |
| Savelieva N.V., Bayandin Y.V., Naimark O.B. | |||
| No 1 (2020) | Modeling a Dynamic Response at Resonant Vibrations of an Elongated Plate with an Integral Damping Coating | Abstract |
(Rus) |
| Paimushin V.N., Firsov V.A., Shishkin V.M. | |||
| No 1 (2023) | MODELING OF 3D-PRINTING PROCESSES FOR COMPOSITE TOOLING AND TRANSFER MOLDING OF GRID STRUCTURES | Abstract |
(Rus) |
| Shabalin L.P., Puzyretskiy E.A., Khaliulin V.I., Batrakov V.V. | |||
| No 4 (2023) | MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS | Abstract |
(Rus) |
| Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G. | |||
| No 4 (2022) | MODELING OF CREEP PROCESSES OF SINGLE-CRYSTAL ALLOYS WITH TAKING INTO ACCOUNT OF RAFTING | Abstract |
(Rus) |
| Grishchenko A.I., Semenov A.S. | |||
| No 4 (2020) | Modeling of deformation and fracture of porous media taking into account their morphological composition | Abstract |
(Rus) |
| Shalimov A.S., Tashkinov M.A. | |||
| No 2 (2018) | Modeling of dynamic behavior of reinforced cylindrical shells under elastic-plastic deformation of materials of composition components | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 3 (2017) | Modeling of dynamic bending of a rigid-plastic reinforced layered curvilinear plate with a supported circular hole under explosive loads | Abstract |
(Rus) |
| Romanova T.P. | |||
| No 3 (2015) | Modeling of elastic behavior of multicomponent composite materials based on approximate solution of stochastic boundary value problems | Abstract |
(Rus) |
| Tashkinov M.A. | |||
| No 3 (2017) | Modeling of elastic-plastic deformation of work material along multielement piecewise zig-zag linear trajectories | Abstract |
(Rus) |
| Zubchaninov V.G., Alekseev A.A., Gultiaev V.I. | |||
| No 1 (2024) | MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION | Abstract |
(Rus) |
| Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. | |||
| No 2 (2024) | MODELING OF PHOTOPOLYMER CURING | Abstract |
(Rus) |
| Fedulov B.N. | |||
| No 3 (2023) | MODELING OF PRESTRESSED PLATES WITH MATERIAL INHOMOGENEITY, PERFORATIONS AND INCLUSIONS | Abstract |
(Rus) |
| Bogachev I.V., Nedin R.D. | |||
| No 4 (2021) | Modeling of rubber-cord layers under quasi-static loading | Abstract |
(Rus) |
| Sheshenin S.V., Yikun D., Chistyakov P.V., Artamonova N.B. | |||
| No 2 (2023) | MODELING OF STEADY-STATE LIQUID FILTRATION IN A PIECEWISE INHOMOGENEOUS ELASTIC-POROUS MEDIUM IN THE CLASS OF ALMOST-PERIODIC FUNCTIONS (PLANE PROBLEM) | Abstract |
(Rus) |
| Mikishanina E.A. | |||
| No 2 (2019) | Modeling of Strands Formation in Elastomeric Composites | Abstract |
(Rus) |
| Sokolov A.K., Garishin O.K., Svistkov A.L. | |||
| No 2 (2017) | Modeling of the cross-section ovality of single crystal nickel-based superalloy samples under tension | Abstract |
(Rus) |
| Semenov A.S., Beliaev M.O., Grishchenko A.I. | |||
| No 2 (2022) | Modeling of the elastoplastic deformation process of single crystal superalloys | Abstract |
(Rus) |
| Grishchenko A.I., Semenov A.S. | |||
| No 3 (2023) | MODELING OF THE INITIATION CONDITIONS OF CRACKS IN A PIPE UNDER PRESSURE OF A HYDROGENOUS MEDIUM | Abstract |
(Rus) |
| Zinovieva T.V. | |||
| No 4 (2017) | Modeling of the product termomechanical behavior during 3D deposition of wire materials in ANSYS | Abstract |
(Rus) |
| Smetannikov O.Y., Trushnikov D.N., Maksimov P.V., Bartolomey M.L., Kovyazin A.V. | |||
| No 1 (2013) | Modeling of the waves on a surface of a cylindrical configuration of magnetic fluid, surrounding a long porous core | Abstract |
(Rus) |
| Taktarov N.G., Runova O.A. | |||
| No 3 (2020) | Modeling the deformation process of a plate with a stress concentrator taking into account the postcritical stage of material deformation | Abstract |
(Rus) |
| Wildemann V.E., Tretyakov M.P., Mugaratov A.I. | |||
| No 2 (2024) | MODELING THE DEFORMATION PROCESS OF AN UNDERWATER GAS PIPELINE UNDER THE EXPLOSIVE LOADING | Abstract |
(Rus) |
| Abuzyarov М.H., Glazova E.G., Kochetkov A.V., Kochetkov M.A. | |||
| No 2 (2019) | Modeling the Dynamic Behavior of Spatially Reinforced Plates of Nonlinear Elastic Materials within the Refined Bending Theory | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 4 (2017) | Modeling the dynamic penetration processes of dimensional bodies in a compressible elastoplastic medium | Abstract |
(Rus) |
| Linnik E.Y., Kotov V.L., Konstantinov A.Y. | |||
| No 2 (2017) | Modeling the dynamics of reinforced shallow shells made of nonlinear elastic materials | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 2 (2021) | Modeling the Effective Conductive Properties of Polymer Nanocomposites with a Random Arrangement of Graphene Oxide Particles | Abstract |
(Rus) |
| Tashkinov M.A., Dobrydneva A.D., Matveenko V.P., Silberschmidt V.V. | |||
| No 2 (2021) | Modeling the Mechanical Response of Auxetic Metamaterials to Dynamic Effects | Abstract |
(Rus) |
| Skripnyak V.V., Chirkov M.O., Skripnyak V.A. | |||
| No 2 (2020) | Modeling the processes of atom structure formation of a superconducting spin valve | Abstract |
(Rus) |
| Vakhrushev A.V., Fedotov A.Y., Savva Y.B., Sidorenko A.S. | |||
| 301 - 400 of 687 Items | << < 1 2 3 4 5 6 7 > >> | ||
ISSN 2224-9893 (Print) ISSN 2226-1869 (Online) |
User
Keywords
ANSYS
composite
cyclic loading
damage accumulation
deformation
elasticity
experiment
experimental mechanics
finite element method
fracture
mathematical model
mathematical modeling
numerical modeling
numerical simulation
plasticity
residual stresses
stability
strength
stress-strain state
temperature
tension
Information
×
User
Keywords
ANSYS
composite
cyclic loading
damage accumulation
deformation
elasticity
experiment
experimental mechanics
finite element method
fracture
mathematical model
mathematical modeling
numerical modeling
numerical simulation
plasticity
residual stresses
stability
strength
stress-strain state
temperature
tension
Information