Issue |
Title |
No 3 (2016) |
Static and dynamic analysis for 3D problems of linear magneto-electro-elasticity using BEM |
|
Markov I.P. |
No 1 (2013) |
Finite element realization of geometrical immersion method on the basis of Kastilyano's variation principle for two-dimensional problem theory elasticity |
|
Trufanov N.A., Kuznetsova Y.S. |
No 1 (2017) |
Nonlinear and coupled thermal effects during finite element simulation of contact thermo-force surface hardening |
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Ivannikov A.Y. |
No 6 (2023) |
METHOD FOR CALCULATING RESONANCES OF ACOUSTIC STRESSES AT THE BOUNDARIES OF AN ANISOTROPIC LAYER |
|
Belyayev Y.N. |
No 4 (2017) |
Numerical solution for an inverse problem about determination of volumetric heat capacity of rock mass during artificial freezing |
|
Zhelnin M.S., Plekhov O.A., Semin M.A., Levin L.Y. |
No 1 (2023) |
SPECTRAL DYNAMIC STIFFNESS METHOD FOR THE FLUTTER PROBLEM OF COMBINED PLATES |
|
Papkov S.O., Papkova Y.I., Pasechnik V.A. |
No 2 (2018) |
Numerical damping of oscillations of beams by using multiple point actuators |
|
Atamuratov A.Z., Mikhailov I.E., Taran N.A. |
No 4 (2014) |
Coupled model of fluid-saturated porous materials based on a combination of discrete and continuum approaches |
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Korostelev S.Y., Psakhie S.G. |
No 5 (2023) |
THE INFLUENCE OF THE STRUCTURAL ORGANIZATION OF CHIRAL METAMATERIALS ON THEIR PHYSICAL AND MECHANICAL CHARACTERISTICS |
|
Akhmetshin L.R., Smolin I.Y. |
No 4 (2023) |
APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS |
|
Chepurnenko A.S., Turina V.S. |
No 4 (2022) |
REFINED DISCRETE METHOD FOR CALCULATING STIFFENED ORTHOTROPIC SHELLS |
|
Semenov A.A. |
No 2 (2016) |
Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes |
|
Kamenev I.V., Semenov A.A. |
No 1 (2022) |
Calculation of VAT and assessment of the strength of a segmented cylindrical shell made of composite materials with metal inserts |
|
Rogozhnikova E.N., Anoshkin A.N., Bulbovich R.V. |
No 4 (2015) |
Dynamics of flexible shaft in rigid tube |
|
Belyaev A.K., Eliseev V.V., Kalashnikov S.V. |
No 2 (2017) |
A shock loading on a bar with a central crack |
|
Malik A.V., Ryazantseva I.E., Lavit I.M. |
No 3 (2023) |
MODELING OF PRESTRESSED PLATES WITH MATERIAL INHOMOGENEITY, PERFORATIONS AND INCLUSIONS |
|
Bogachev I.V., Nedin R.D. |
No 4 (2020) |
Investigation of damage accumulation and delamination propagation in polymer composite materials based on two-level fracture models |
|
Dolgikh D.A., Tashkinov M.A. |
No 1 (2016) |
Fractal analysis of deformation curves of fiber-reinforced fine-grained concretes under compression |
|
Selyaev V.P., Nizina T.A., Balykov A.S., Nizin D.R., Balbalin A.V. |
No 2 (2023) |
CALCULATION OF THE TOOL SHAPE FOR TUBE MIDDLE PART DISTRIBUTION BY RIGID MATRIX |
|
Bormotin K.S., Potianikhin D.A., Hlaing M.K., Sinelshchikov A.A. |
No 3 (2022) |
Vibrations of a strip with delamination in the framework of the one-parameter Aifantis model of gradient elasticity theory |
|
Vatulyan A.O., Yavruyan O.V. |
No 2 (2019) |
Dynamics of a Viscoelastic Plate Carrying Concentrated Mass with Account of Physical Nonlinearity of Material. Part 1. Mathematical Model, Solution Method and Computational Algorithm |
|
Mirsaidov M.M., Abdikarimov R.A., Khodzhaev D.A. |
No 4 (2021) |
Simultaneous identification of mechanical properties of functionally graded plates under the Kirchhoff and Tymoshenko models |
|
Bogachev I.V. |
No 2 (2018) |
Stability of orthotropic doubly curved shallow shells with a movable hinged fixing of the border |
|
Kamenev I.V., Semenov A.A. |
No 3 (2021) |
The Numerical simulation of composite sandwich cylindrical shells reinforced with circular frames under local loadings |
|
Sukhomlinov L.G., Shivrin M.V. |
No 1 (2023) |
ГЕНЕРАЦИЯ ПОВЕРХНОСТНЫХ АКУСТИЧЕСКИХ ВОЛН СЕГНЕТОЭЛЕКТРИЧЕСКОЙ ПЛЕНКОЙ BST ПРИ ДЕЙСТВИИ ОДНООСНОЙ НАГРУЗКИ |
|
Shirokov1 V.B., Timoshenko P.E., Kalinchuk V.V. |
No 1 (2020) |
The limit state of concrete and reinforced concrete rods at complex and longitudinal-transverse bending |
|
Nemirovskii Y.V., Tikhonov S.V. |
No 1 (2013) |
Combined discrete modeles in the three-dimensional elastic inhomogeneous bodies analysis of complex shape |
|
Matveev A.D. |
No 4 (2016) |
Numerical analysis of poroviscoelastic prismatic solids and halfspaces dynamics via boundary element method |
|
Ipatov A.A., Belov A.A., Litvinchuk S.Y. |
No 2 (2018) |
Modelling of the amplitude of transverse vibrations of a homogeneous rod upon impact against a rigid obstacle taking into account its own weight |
|
Bityrin A.A. |
No 3 (2022) |
Postbuckling Behavior of Compressed Bars with Nonlinearly Elastic Supports |
|
Kayumov R.A. |
No 2 (2019) |
An asymptotic Solution of the Hypersingular Boundary Integral Equation Simulating Wave Scattering by the Interface Strip-Like Crack |
|
Doroshenko O.V., Kirillova E.V., Fomenko S.I. |
No 3 (2014) |
COMPARISON OF THE RESULTS OF SOLVING THE PROBLEM OF FRACTURE MECHANICS FOR PIPE WITH NON-THROUGH CRACK |
|
Glushkov S.V., Skvortsov Y.V., Perov S.N. |
No 3 (2021) |
Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells |
|
Kornievsky A.S., Nasedkin A.V. |
No 4 (2018) |
Numerical simulation for development of methodology of stress-strain state control of composite bulkhead for aviation application with the usage of FBG sensors |
|
Anoshkin A.N., Zuiko V.Y., Pelenev K.A., Pisarev P.V., Shipunov G.S. |
No 3 (2015) |
CAD/CAE modelling of mechanical behavior of composite outlet guide vane for aircraft jet engine |
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
No 1 (2020) |
On modeling bodies with delaminating coatings taking into account the fields of prestresses |
|
Bogachev I.V., Vatulyan A.O. |
No 1 (2014) |
Influence of circular hole on the shell stress state for arbitrary Gaussian curvature |
|
Dovbnya E.N., Krupko N.A. |
No 1 (2016) |
DETERMINATION OF MECHANICAL CHARACTERISTICS OF TRANSVERSELY ISOTROPIC FIBER COIL ACCORDING TO ISOTROPIC PROPERTIES OF ITS COMPONENTS |
|
Gasparyan A.G., Esipenko I.A. |
No 2 (2024) |
MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM |
|
Velmisov P.A., Tamarova Y.A. |
No 2 (2022) |
Solution of a mixed nonaxisymmetric problem of the theory of elasticity for anisotropic bodies of revolution |
|
Ivanychev D.A. |
No 2 (2019) |
Hydroelastic stability of coaxial cylindrical shells made of piezoelectric material |
|
Bochkarev S.A., Lekomtsev S.V. |
No 1 (2017) |
The possibilities and limitations of the homogenized description of inelastic behavior of brittle porous materials under constrained conditions |
|
Astafurov S.V., Shilko E.V., Psakhie S.G. |
No 2 (2021) |
The Computational Method of Estimating Vibration Stress Levels for GTE Compressor Blades |
|
Pivovarova M.V., Besschetnov V.A. |
No 3 (2018) |
Finite element study of mixed mode loading of the cracked semicircular disc under bending |
|
Stepanova L.V., Frolov K.V. |
No 4 (2015) |
Experimental investigation of defects influence on composites sandwich panels strength using digital image correlation and infrared thermography methods |
|
Lobanov D.S., Wildemann V.E., Spaskova E.M., Chikhachev A.I. |
No 4 (2017) |
Models of molecular dynamics: a review of EAM potentials. Part 1: Potentials for single-component systems |
|
Volegov P.S., Gerasimov R.M., Davlyatshin R.P. |
No 1 (2023) |
PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION |
|
Akhmetshin L.R., Smolin I.Y. |
No 4 (2019) |
Identification of crack-like defect and investigation of stress concentration in coated bar |
|
Sobol B.V., Soloviev A.N., Rashidova E.V., Vasiliev P.V. |
No 1 (2014) |
Investigation of panel flutter of functionally graded circular cylindrical shells |
|
Bochkarev S.A., Lekomtsev S.V. |
No 4 (2016) |
The influence of fluid filtration on the strength of porous fluid-saturated brittle materials |
|
Dimaki A.V., Shilko E.V., Astafurov S.V., Psakhie S.G. |
No 2 (2024) |
THE LIMITING STATE OF A STEEL STRUCTURE UNDER EXTREME THERMOMECHANICAL LOADINGS |
|
Emel yanov I.G., Kislov A.N. |
No 2 (2022) |
Modelling the effect of vibrations on the surface tension of a liquid droplet using meshless methods |
|
Davlyatshin R.P., Perminov A.V., Bayandin Y.V., Saucedo-Zendejo F.R., Trushnikov D.N. |
No 2 (2019) |
Some Features of Monotonic and Cyclic Loadings. Experiment and Modeling |
|
Bondar V.S., Abashev D.R. |
No 2 (2015) |
Features of strain localization in sylvinite under tension |
|
Panteleev I.A., Plekhov O.A., Naimark O.B., Evseev A.V., Pankov I.L., Asanov V.A. |
No 1 (2017) |
Numerical and experimental study of composite bulkhead partition strength with in-situ x-ray monitoring |
|
Potrahov N.N., Anoshkin A.N., Zuiko V.Y., Osokin V.M., Pisarev P.V., Pelenev K.A. |
No 2 (2021) |
Numerical Algorithms for Simulation of a Fluid-Filed Fracture Evolution in a Poroelastic Medium |
|
Borisov V.E., Ivanov A.V., Kritsky B.V., Savenkov E.B. |
No 3 (2018) |
Construction of a Representative Model Based on Computed Tomography |
|
Kharin N.V., Vorobyev O.V., Berezhnoi D.V., Sachenkov O.A. |
No 3 (2015) |
Mathematical modeling of development of beyond design basis accident in integral fast-neuron reactors vessel |
|
Bazhenov V.G., Zhestkov M.N., Zamyatin V.A., Kibets A.I. |
No 1 (2018) |
Modelling the formation of new material surfaces during adhesive delamination of a composite |
|
Glagolev V.V., Markin A.A., Fursaev A.A. |
No 1 (2023) |
SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE |
|
Astapov N.S., Kurguzov V.D. |
No 4 (2019) |
Determination of the critical velocity of the fluid flowing in a single-walled carbon nanotubes embedded in a polymer matrix |
|
Lolov D.S., Lilkova-Markova S.V. |
No 1 (2014) |
Mathematical modelling of vegetable oil plunger extraction |
|
Anferov S.D., Skul’skiy O.I., Slavnov E.V. |
No 3 (2016) |
Non-stationary problems for elastic half-plane with moving point of changing boundary conditions |
|
Tarlakovskii D.V., Fedotenkov G.V. |
No 2 (2024) |
Large Deflections, Loss of Stability and Over-Critical Behavior of Sloping Panels and Arches of Variable Thickness on an Elastic Base |
|
Kayumov R.A. |
No 1 (2022) |
The Simulation of the Nonlinear Consolidation of Porous Media |
|
Sheshenin S.V., Artamonova N.B. |
No 2 (2019) |
The Investigation of the Initial Stress-Strain State Influence on Mechanical Properties of Viscoelastic Bodies |
|
Bogachev I.V., Vatulyan A.O., Dudarev V.V., Nedin R.D. |
No 3 (2015) |
Modeling of elastic behavior of multicomponent composite materials based on approximate solution of stochastic boundary value problems |
|
Tashkinov M.A. |
No 1 (2017) |
Numerical investigation of a physically nonlinear problem of the longitudinal bending of the sandwich plate with a transversal-soft core |
|
Badriev I.B., Makarov M.V., Paimushin V.N. |
No 4 (2023) |
ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE |
|
Kosov D.A., Fedorenkov D.I. |
No 1 (2021) |
Contact problems for an inhomogeneous elastic wedge with variable Poisson’s ratio |
|
Pozharskii D.A., Pozharskaia E.D. |
No 3 (2018) |
The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain |
|
Rekov A.M., Vichuzhanin D.I. |
No 4 (2015) |
Formation of divergent testing efforts and experimental evaluation of material strength under biaxial stretching |
|
Zenkov E.V., Tsvik L.B. |
No 1 (2018) |
ESTIMATION OF THE CYLINDRICAL COMPOSITE SHELL STIFFNESS AT THE INITIAL STAGE OF CURING DURING DEPLOYMENT BY INTERNAL PRESSURE |
|
Gilev V.G., Rusakov S.V., Pestrenin V.M., Pestrenin I.V. |
No 3 (2019) |
Simulation of residual stresses during pulsed thermo-force surface hardening |
|
Bagmutov V.P., Denisevich D.S., Zakharov I.N., Romanenko M.D., Fastov S.A. |
No 1 (2013) |
Numerical algorithm of solving the problem of large elastic-plastic deformation by FEM |
|
Davydov R.L., Sultanov L.U. |
No 2 (2016) |
The method for analyzing mechanics of thin elastic rod systems using the differential approach |
|
Krasnorutskiy D.A. |
No 2 (2024) |
COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS |
|
Wildemann V.E., Mugatarov A.I., Khmelev A.A. |
No 1 (2022) |
Calculation of the thermal conductivity coefficient of nanocrystals |
|
Severyukhin A.V., Severyukhina O.Y., Vakhrushev A.V. |
No 4 (2018) |
Elimination of a Rigid Body Oscillations Suspended on a Variable-Length Cable with a Controlled Horizontal Suspension Movement |
|
Russkikh S.V., Shklyarchuk F.N. |
No 1 (2015) |
NUMERICAL MODELLING OF PERFORATED SHELLS STABILITY |
|
Antipov A.A., Artemyeva A.A., Bazhenov V.G., Zhestkov M.N., Kibec A.I. |
No 2 (2017) |
Computing orthotropic constructions using the variation method based on three-dimensional functions with final carriers |
|
Khayrullin F.S., Sakhbiev O.M. |
No 4 (2023) |
INVESTIGATION OF THE ELECTRO-MAGNETO-ELASTIC STATE OF A FINITE MULTIPLY CONNECTED THIN PLATE |
|
Kaloerov S.A., Seroshtanov A.V. |
No 1 (2021) |
Studying Deformation Behaviors in Austenitic Stainless Steels within a Temperature Range of 143 K < T < 420 K |
|
Barannikova S.A., Nikonova A.M., Kolosov S.V. |
No 1 (2019) |
The Research of the Mechanical Behavior of Elastically Transformable Composite Structures |
|
Khaliulin V.I., Batrakov V.V., Shabalin L.P., Kiauka M.Y., Bezzametnov O.N. |
No 4 (2015) |
Natural vibrations of heated functionally graded cylindrical shells with fluid |
|
Bochkarev S.A., Lekomtsev S.V. |
No 1 (2018) |
A model of crystallization process taking into account phase changes in formation of a metallic material by laser fusion method |
|
Suhodoeva T.S., Kamenskikh A.A., Maksimov P.V. |
No 4 (2022) |
SECONDARY BUCKLING OF A HEATED CIRCULAR PLATE |
|
Levyakov S.V. |
No 3 (2019) |
Numerical Simulation of the Phase Transition Control in Torsion of a Hollow Cylinder Made of Heusler Alloy |
|
Rogovoy A.A., Stolbova O.S. |
No 2 (2013) |
Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images |
|
Tretyakova T.V., Spaskova E.M. |
No 1 (2024) |
MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION |
|
Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. |
No 4 (2018) |
Contact problems for an elastic inhomogeneous body with a cylindrical cavity |
|
Pozharskii D.A., Pozharskaya E.D. |
No 4 (2015) |
Stress-strain analysis and strength prediction of composite outlet guide vane for aircraft jet engine |
|
Grinev M.A., Anoshkin A.N., Pisarev P.V., Zuiko V.Y., Shipunov G.S. |
No 2 (2017) |
Thermoelasticity of a plane regular truss With orthogonal structure |
|
Rybakov L.S. |
No 3 (2023) |
NATURAL VIBRATIONS AND HYDROELASTIC STABILITY OF A PLATE WITH A PIEZOELECTRIC ELEMENT CONNECTED TO AN EXTERNAL RL-CIRCUIT |
|
Lekomtsev S.V., Matveenko V.P., Senin A.N. |
No 4 (2020) |
Finite element method with account of singularity for mixed mode cracks |
|
Tartygasheva A.M., Shlyannikov V.N., Tumanov A.V. |
No 1 (2019) |
Mathematical modeling of the stress-strain state in surface hardened thin-walled tubes with regard to the residual shear stresses |
|
Radchenko V.P., Pavlov V.P., Saushkin M.N. |
No 1 (2018) |
Numerical study of a thermomechanical behavior of a crystallizing polymer medium with regard to finite deformations |
|
Kulikov R.G., Kulikova T.G., Smetannikov O.Y. |
No 3 (2022) |
Development of the digital image correlation (DIC) method for mechanical testing at elevated temperatures |
|
Strungar E.M., Lobanov D.S. |
No 3 (2019) |
The Modeling of the Edge Fatigue Crack Growth under High Frequency Loading |
|
Nikitin A.D., Nikitin I.S., Stratula B.A. |
No 2 (2013) |
Development of experimental equipment for hydrostatic compression of porous materials |
|
Berezin I.M. |
1 - 100 of 150 Items |
1 2 > >> |