ARTICLES
| Issue | Title | Abstract | File |
| No 1 (2024) | THERMOMECHANICAL COUPLED MODEL OF COATING SYNTHESIS ON A SUBSTRATE | Abstract |
 (Rus) |
| Knyazeva A.G. | |||
| No 4 (2024) | Experimental Study of Ultimate Deformation and Fracture of FRP with Stress Concentrators | Abstract |
(Rus) |
| Strungar E.M., Lobanov D.S., Chebotareva E.A. | |||
| No 2 (2024) | THE LIMITING STATE OF A STEEL STRUCTURE UNDER EXTREME THERMOMECHANICAL LOADINGS | Abstract |
(Rus) |
| Emel yanov I.G., Kislov A.N. | |||
| No 3 (2024) | FINITE-DIFFERENCE ANALYSIS OF PLANE-PARALLEL AND PLANE-RADIAL FLOWS IN THE ELASTIC MODE OF LIQUID AND GAS FILTRATION | Abstract |
(Rus) |
| Eremin M.O., Bakeev R.A., Stefanov Y.P., Chirkov A.O., Pazhin A. | |||
| No 1 (2024) | CALCULATION OF STATIC DEFORMATION OF AXISYMMETRIC SHELLS OF ROTATION WITH DIFFERENTIAL MODEL | Abstract |
(Rus) |
| Nguyen C.M., Shelevaya D.R., Krasnorutskiy D.A. | |||
| No 2 (2024) | MATHEMATICAL MODELING OF THE DYNAMICS OF THE AEROELASTIC "PIPELINE – PRESSURE SENSOR" SYSTEM | Abstract |
(Rus) |
| Velmisov P.A., Tamarova Y.A. | |||
| No 3 (2024) | EXPERIMENTAL VERIFICATION OF THE FREQUENCY METHOD FOR EVALUATING THE AXIAL LOAD AND IMPERFECTION OF BOUNDARY CONDITIONS IN REINFORCING BARS | Abstract |
(Rus) |
| Azarov A.A., Popov A.L. | |||
| No 1 (2024) | COMPACT ANALYTICAL MODEL FOR ELECTROMAGNETIC DISK-SHAPED UNDERWATER TRANSDUCER | Abstract |
(Rus) |
| Popov A.V., Lukin A.V., Piskun N.V. | |||
| No 2 (2024) | Multilevel Model for Describing Martensitic Transformation: Formation of the Polyhedral Martensite Structure | Abstract |
(Rus) |
| Podsedertsev A.N., Kondratev N.S., Trusov P.V., Makarevich E.S. | |||
| No 4 (2024) | INFLUENCE OF TEMPERATURE-VELOCITY DEFORMATION PARAMETERS ON STRUCTURES OF THE HEAT-RESISTANT NICKEL ALLOY | Abstract |
(Rus) |
| Abashev D.R., Bondar V.S., Dikovitsky P.O., Morozov S.V. | |||
| No 1 (2024) | MODELING OF HIGH-RATE HARDENING OF A POLYMER COMPOSITE MATERIAL UNDER LOADING ALONG THE REINFORCEMENT DIRECTION | Abstract |
(Rus) |
| Fedulov B.N., Konstantinov A.Y., Fedorenko A.N., Sergeichev I.V. | |||
| No 2 (2024) | MODELING THE DEFORMATION PROCESS OF AN UNDERWATER GAS PIPELINE UNDER THE EXPLOSIVE LOADING | Abstract |
(Rus) |
| Abuzyarov М.H., Glazova E.G., Kochetkov A.V., Kochetkov M.A. | |||
| No 4 (2024) | High-Cycle Tensile and Torsional Fatigue of AlSi10Mg Aluminum Alloy Produced by Selective Laser Alloying | Abstract |
(Rus) |
| Ilinykh A.V., Pankov A.M., Lykova A.V. | |||
| No 1 (2024) | FLOW CURVES AND STRESS-STRAIN CURVES GENERATED BY A NONLINEAR MODEL FOR SHEAR FLOW OF THIXOTROPIC VISCOELASTIC MEDIA ACCOUNTING FOR STRUCTURE EVOLUTION | Abstract |
(Rus) |
| Khokhlov A.V., Gulin V.V. | |||
| No 3 (2024) | MULTIPARAMETRIC OPTIMIZATION OF THE ROTOR BLADE DESIGN OF A HELICOPTER WITH CONTROLLED GEOMETRY | Abstract |
(Rus) |
| Anoshkin A.N., Pisarev P.V., Nureeva E.G., Bayandin S.R. | |||
| No 4 (2024) | An Express Estimation of Fatigue Strength of Composite Flanges by Infrared Thermography | Abstract |
(Rus) |
| Nihamkin M.S., Solomonov D.G. | |||
| No 2 (2024) | ABOUT ONE METHOD OF STUDYING THE COEFFICIENT OF THERMAL EXPANSION OF POLYMERS | Abstract |
(Rus) |
| Trufanov А.N. | |||
| No 3 (2024) | ASYMPTOTIC BEHAVIOUR OF THE CRACK TIP FIELDS UNDER CREEP REGIME TAKING INTO ACCOUNT DAMAGE ACCUMULATION PROCESSES | Abstract |
(Rus) |
| Chapliy D.V., Belova О.N., Stepanova L.V., Bykova Y.S. | |||
| No 1 (2024) | MEMORY DEPENDENT RESPONSE IN AN INFINITELY LONG THERMOELASTIC SOLID CIRCULAR CYLINDER | Abstract |
(Rus) |
| Lamba N.K., Deshmukh K.C. | |||
| No 4 (2024) | Contact Problems of an Inclusion in a Plane Elastic Wedge | Abstract |
(Rus) |
| Pozharskii D.A., Pozharskaya E.D., Sobol B.V. | |||
| No 2 (2024) | INFLUENCE OF ADDITIVE MANUFACTURING TECHNOLOGY OF TOPOLOGICALLY OPTIMIZED PRODUCTS FROM PHOTOPOLYMER RESINS ON THE ANISOTROPY OF THEIR MECHANICAL PROPERTIES | Abstract |
(Rus) |
| Ezhov A.D., Kotovich I.V., Kiselev V.P. | |||
| No 3 (2024) | EXPERIMENTAL DETERMINATION OF CRACK-TIP FIELDS: HOLOGRAPHIC INTERFEROMETRY METHOD AND DIGITAL IMAGE CORRELATION METHOD | Abstract |
(Rus) |
| Anisimov G.S., Stepanova L.V. | |||
| No 1 (2024) | VISCOPLASTIC DEFORMATION OF GRANULAR NICKEL ALLOY AT HIGH TEMPERATURES | Abstract |
(Rus) |
| Abashev D.R., Bondar V.S., Dikovitsky P.O., Morozov S.V., Larionova O.E. | |||
| No 4 (2024) | Relaxation of Residual Stresses in a Surface-Hardened Prismatic Specimen with a Stress Concentrator of a Semicircular Profile under Conditions of High-Temperature Creep | Abstract |
(Rus) |
| Radchenko V.P., Saushkin M.N., Sishskin D.M. | |||
| No 2 (2024) | COMPUTATIONAL-EXPERIMENTAL METHOD FOR STRESS-STRAIN CURVE CONSTRUCTING UNDER CONDITIONS OF INHOMOGENEOUS STRESS FIELDS | Abstract |
(Rus) |
| Wildemann V.E., Mugatarov A.I., Khmelev A.A. | |||
| No 3 (2024) | FEATURES OF DEFORMATION OF A BIMETALLIC PLATE | Abstract |
(Rus) |
| Barannikova S.A., Li Y.V. | |||
| No 1 (2024) | STRESS-STRAIN STATE OF THIN-WALLED PIPE BLANKS DURING CRIMPING IN A CURVED AXISYMMETRIC MATRIX | Abstract |
(Rus) |
| Andrianov I.K., Feoktistov S.I., Maryin S.B. | |||
| No 4 (2024) | On Two-Level Models of the Taylor–Bishop–Hill Type for Describing the Elastoplastic Deformation of Polycrystalline Bodies: One Option for Solving the Problem of Uncertainty in the Choice of Active Slip Systems | Abstract |
(Rus) |
| Trusov P.V., Gladkikh P.A. | |||
| No 2 (2024) | Large Deflections, Loss of Stability and Over-Critical Behavior of Sloping Panels and Arches of Variable Thickness on an Elastic Base | Abstract |
(Rus) |
| Kayumov R.A. | |||
| No 3 (2024) | ENERGY CHARACTERISTICS OF THE PASSAGE OF A SOUND WAVE THROUGH REGIONS OF STEPWISE CHANGES IN THE WAVEGUIDE CROSS SECTION | Abstract |
(Rus) |
| Papkova Y.I. | |||
| No 1 (2024) | ON IDENTIFICATION OF PARAMETERS OF A NONLINEAR CONSOLIDATION MODEL OF SANDY SOIL | Abstract |
(Rus) |
| Artamonova N.B., Sheshenin S.V. | |||
| No 4 (2024) | Simulation of Fracture in Deformable Bodies with Stress Concentrators Taking into Account the Statistical Distribution of Ultimate Strength in Structural Elements | Abstract |
(Rus) |
| Feklistova E.V., Mugatarov A.I., Wildemann V.E. | |||
| No 2 (2024) | DEFORMATION OF A THIN FILM AFTER CONTACT LOSS WITH A CYLINDRICAL BASE, WITH ACCOUNTING FOR THE INFLUENCE OF ITS CURVATURE, COMPLIANCE, AND ACTION OF TRANSVERSE FORCES; DELAMINATION LOCATED IN THE CIRCUMFERENTIAL DIRECTION | Abstract |
(Rus) |
| Gandilyan D.V. | |||
| No 3 (2024) | THE STATE OF STRESS AND DESTRUCTION OF AN ADHESIVE WHEN JOINING PLATES WITH A LAP | Abstract |
(Rus) |
| B.E., Glagolev V.V., Glagolev L.V., Markin A.A. | |||
| No 1 (2024) | VARIATIONAL-DIFFERENCE SOLUTION OF DEFORMATION AND BUCKLING PROBLEMS OF ELASTOPLASTIC SHELLS OF REVOLUTION WITH ELASTIC FILLER UNDER COMBINED QUASI-STATIC AND DYNAMIC AXISYMMETRIC LOADINGS | Abstract |
(Rus) |
| Bazhenov V.G., Kalinina Y.A., Nagornykh E.V., Samsonova D.A. | |||
| No 4 (2024) | The Use of a Shunted Piezoelectric Element to Ensure the Best Dissipative Characteristics of Viscoelastic Shells | Abstract |
(Rus) |
| Iurlova N.А., Oshmarin D.A., Sevodina N.V. | |||
| No 2 (2024) | MODELING OF PHOTOPOLYMER CURING | Abstract |
(Rus) |
| Fedulov B.N. | |||
| No 3 (2024) | NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF DYNAMIC DEFORMATION AND FAILURE ON IMPACT OF RECTANGULAR PLATES | Abstract |
(Rus) |
| Bazhenov V.G., Ryabov A.A., Kukanov S.S., Ptitsyn S.O. | |||
| No 2 (2023) | MODELING OF STEADY-STATE LIQUID FILTRATION IN A PIECEWISE INHOMOGENEOUS ELASTIC-POROUS MEDIUM IN THE CLASS OF ALMOST-PERIODIC FUNCTIONS (PLANE PROBLEM) | Abstract |
(Rus) |
| Mikishanina E.A. | |||
| No 4 (2023) | BERNOULLI HYPOTHESES IN THE PROBLEM OF BENDING A MECHANICALLY INCOMPRESSIBLE BEAM | Abstract |
(Rus) |
| Firsanov V.V. | |||
| No 3 (2023) | ON THE INFLUENCE OF THE MECHANICAL CHARACTERISTICS OF A THIN ADHESION LAYER ON THE COMPOSITE STRENGTH. PART 2. ELASTIC-plastic DEFORMATION | Abstract |
(Rus) |
| Bogacheva V.E., Glagolev V.V., Glagolev L.V., Markin A.A. | |||
| No 1 (2023) | IDENTIFICATION OF DEFECTS IN A COATING WEDGE BASED ON ULTRASONIC NON-DESTRUCTIVE TESTING METHODS AND CONVOLUTIONAL NEURAL NETWORKS | Abstract |
(Rus) |
| Soloviev A.N., Sobol B.V., Vasiliev P.V., Senichev A.V., Novikova A.I. | |||
| No 4 (2023) | ANALYSIS OF METHODS FOR CONSTRUCTING TRUE DEFORMATION DIAGRAMS OF ELASTOPLASTIC MATERIALS UNDER LARGE DEFORMATIONS | Abstract |
(Rus) |
| Bazhenov V.G., Kazakov D.A., Kukanov S.S., Osetrov D.L., Ryabov A.A. | |||
| No 6 (2023) | LOCAL DAMAGES IN THE HIP JOINT ENDOPROSTHESIS FROM THE С/С COMPOSITE DURING OVERLOADS | Abstract |
(Rus) |
| Razumovskii E.S., Shavshukov V.E. | |||
| No 2 (2023) | IDENTIFICATION OF STRESS INTENSITY FACTORS, T-STRESSES AND HIGHER-ORDER COEFFICIENTS OF REGULAR TERMS IN THE WILLIAMS SERIES EXPANSION THROUGH MOLECULAR DYNAMICS SIMULATIONS | Abstract |
(Rus) |
| Stepanova L.V., Belova O.N. | |||
| No 4 (2023) | APPLICATION OF THE FINITE ELEMENT METHOD IN COMBINATION WITH THE CONTACT LAYER METHOD TO DETERMINE THE STRESS-STRAIN STATE OF MULTILAYER BEAMS | Abstract |
(Rus) |
| Chepurnenko A.S., Turina V.S. | |||
| No 1 (2023) | METHODS FOR REDUCING NOTCH SENSITIVITY OF HYBRID PSEUDO-DUCTILE POLYMER COMPOSITES WITH FABRIC REINFORCEMENT: EXPERIMENTAL STUDY | Abstract |
(Eng) |
| Leshkov E.V., Olivenko N.A., Kudryavtsev O.A., Sapozhnikov S.B. | |||
| No 3 (2023) | BASE NEUTRAL SURFASE SELECTION FOR OPTIMAL DESIGN OF STRUCTURALLY-ANISOTROPIC AIRCRAFT PANELS MADE FROM COMPOSITE MATERIALS WITH REFINED BUCKLING THEORY RESTRICTIONS | Abstract |
(Rus) |
| Gavva L.M., Mitrofanov O.V., Firsanov V.V. | |||
| No 1 (2023) | DEPOSITION OF FULLERITES C60 ON A SOLID SUBSTRATE TO FORM A FILM | Abstract |
(Rus) |
| Suvorov S.V., Vakhrushev A.V. | |||
| No 4 (2023) | ELASTIC-PLASTIC BEHAVIOR AND FRACTURE OF STRUCTURES WITH LOSS CONCENTRATORS UNDER CYCLIC LOADS | Abstract |
(Rus) |
| Bondar V.S., Abashev D.R., Fomin D.J. | |||
| No 6 (2023) | ESTIMATION OF RESIDUAL STRESSES IN BIMETALLIC PLUNGER PUMP CYLINDERS AFTER THERMAL DEFORMATION | Abstract |
(Rus) |
| Silina O.V., Ledon D.R., Babkin E.O., Bosyakov M.N. | |||
| No 2 (2023) | DYNAMICS AND STABILITY OF KAPITSA'S TWO-LINK PENDULUM | Abstract |
(Rus) |
| Belyaev A.K., Polyakova O.R., Tovstik T.P. | |||
| No 1 (2023) | SIMULATION OF ELASTOPLASTIC FRACTURE OF A CENTER CRACKED PLATE | Abstract |
(Rus) |
| Astapov N.S., Kurguzov V.D. | |||
| No 3 (2023) | DEVELOPMENT OF A METHOD FOR DESTROYING THE ROTOR BLADES OF A HIGH-PRESSURE COMPRESSOR AT A GIVEN FREQUENTATION OF ROTATION | Abstract |
(Rus) |
| Gladkiy I.L., Pivovarova M.V. | |||
| No 6 (2023) | ENERGY CONDITIONS DETERMINING SIZE RANGE IMPACTING FORMATION OF MAGNESIUM HYDRIDE | Abstract |
(Rus) |
| Aptukov V.N., Skryabina N.E., Fruchart D. | |||
| No 1 (2023) | NUMERICAL SIMULATION OF GAS-DYNAMIC AND STRENGTH CHARACTERISTICS OF A FAN FOR THE EXPERIMENTAL TEST RIG FOR INVESTIGATION OF ICE BREAKDOWN ON ROTATING WORKING BLADES | Abstract |
(Rus) |
| Kalyulin S.L., Kalyulin N.A., Modorskii V.Y., Vladimirov N.V. | |||
| No 4 (2023) | INVESTIGATION OF THE ELECTRO-MAGNETO-ELASTIC STATE OF A FINITE MULTIPLY CONNECTED THIN PLATE | Abstract |
(Rus) |
| Kaloerov S.A., Seroshtanov A.V. | |||
| No 6 (2023) | SIMULATING THE STRESS-STRAIN STATE DURING LASER METAL DEPOSITION TO DETERMINE THE FINAL WARPING OF PRODUCTS | Abstract |
(Rus) |
| Smetannikov O.Y., Bekmansurov M.R., Ilinykh G.V., Dongauzer K.A. | |||
| No 2 (2023) | INFLUENCE OF SURFACE CHARGE ON THE FORMATION OF THE CARBONIZED LAYER RELIEF ON THE POLYMER SURFACE DURING ION-PLASMA TREATMENT | Abstract |
(Rus) |
| Beliaev A.Y., Izyumov R.I., Svistkov A.L. | |||
| No 1 (2023) | PROGRAMMABLE BEHAVIOR OF THE METAMATERIAL BY KINDS OF UNIT CELLS CONNECTION | Abstract |
(Rus) |
| Akhmetshin L.R., Smolin I.Y. | |||
| No 3 (2023) | NON-CONTACT DEFORMATION WITH REVERSIBLE SURFACE PLASTIC DEFORMATION | Abstract |
(Rus) |
| Zaides S.A., Nguyen N.N. | |||
| No 6 (2023) | METHOD FOR CALCULATING RESONANCES OF ACOUSTIC STRESSES AT THE BOUNDARIES OF AN ANISOTROPIC LAYER | Abstract |
(Rus) |
| Belyayev Y.N. | |||
| No 1 (2023) | APPLICABILITY INDICATORS FOR THE NONLINEAR MAXWELL-TYPE ELASTO-VISCOPLASTIC MODEL WITH POWER MATERIAL FUNCTIONS AND TECHNIQUES TO CALIBRATE THEM | Abstract |
(Rus) |
| Khokhlov А.V. | |||
| No 4 (2023) | ANALYSIS OF THE STRESS-STRAIN STATE OF ALUMINUM ALLOY D16T UNDER A COMPLEX STRESS STATE ACCOUNTING FOR DAMAGE | Abstract |
(Rus) |
| Kosov D.A., Fedorenkov D.I. | |||
| No 6 (2023) | ANALYSIS OF THE INFLUENCE OF ALLOYING ADDITIONS ON THE STRUCTURE OF AL-LI ALLOYS AND DEFORMATION MECHANISMS UNDER SUPERPLASTIC CONDITIONS (AN ANALYTICAL REVIEW) | Abstract |
(Rus) |
| Sharifullina E.R., Shveykin A.I., Trusov P.V. | |||
| No 2 (2023) | PECULIARITIES OF SH WAVE PROPAGATION IN A TWO-LAYER STRUCTURE OF INHOMOGENEOUS PIEZOELECTRIC AND DIELECTRIC LAYERS | Abstract |
(Rus) |
| Belyankova T.I., Vorovich E.I., Kalinchuk V.V. | |||
| No 1 (2023) | STRENGTH AND DUCTILITY CHARACTERISTICS OF METAL ALLOYS AND STAINLESS STEELS CREATED BY WIRE-ARC SURFACING IN A WIDE RANGE OF STRAIN RATES | Abstract |
(Rus) |
| Bayandin Y.V., Dudin D.S., Ilyinykh A.V., Permyakov G.L., Chudinov V.V., Keller I.E., Trushnikov D.N. | |||
| No 3 (2023) | UNSTEADY THERMOELASTIC DIFFUSION VIBRATIONS OF THE BERNOULLI – EULER BEAM UNDER THE ACTION OF A DISTRIBUTED TRANSVERSE LOAD | Abstract |
(Rus) |
| Zemskov A.V., Le V.H. | |||
| No 6 (2023) | FATIGUE SENSITIVITY OF GFRP UNDER PROPORTIONAL CYCLIC TENSION WITH TORSION | Abstract |
(Rus) |
| Wildemann V.E., Staroverov O.A., Mugatarov A.I., Kuchukov A.M. | |||
| No 1 (2023) | MODELING OF 3D-PRINTING PROCESSES FOR COMPOSITE TOOLING AND TRANSFER MOLDING OF GRID STRUCTURES | Abstract |
(Rus) |
| Shabalin L.P., Puzyretskiy E.A., Khaliulin V.I., Batrakov V.V. | |||
| No 4 (2023) | STUDYING GRAPHENE ELECTROMECHANICAL BEHAVIOR BASED ON THE ELASTIC PLATES MOMENT-MEMBRANE THEORY | Abstract |
(Rus) |
| Krylova E.Y., Sargsyan S.H. | |||
| No 6 (2023) | REFINED MODEL OF THERMOELASTIC-PLASTIC DYNAMIC DEFORMATION OF FLEXIBLE REINFORCED CYLINDRICAL SHELLS | Abstract |
(Rus) |
| Yankovskii A.P. | |||
| No 2 (2023) | CALCULATION OF THE TOOL SHAPE FOR TUBE MIDDLE PART DISTRIBUTION BY RIGID MATRIX | Abstract |
(Rus) |
| Bormotin K.S., Potianikhin D.A., Hlaing M.K., Sinelshchikov A.A. | |||
| No 1 (2023) | PLANE PROBLEMS ABOUT THE ACTION OF OSCILLATING LOAD ON THE BOUNDARY OF AN ELASTIC ISOTROPIC LAYER IN THE PRESENCE OF SURFACE STRESSES | Abstract |
(Rus) |
| Kalinina T.I., Nasedkin A.V. | |||
| No 3 (2023) | MODELING OF THE INITIATION CONDITIONS OF CRACKS IN A PIPE UNDER PRESSURE OF A HYDROGENOUS MEDIUM | Abstract |
(Rus) |
| Zinovieva T.V. | |||
| No 6 (2023) | METHOD OF ESTIMATING PLASTIC DEFORMATION DISTRIBUTIONS AT THE FATIGUE CRACK TIP BASED ON THE SOLUTION OF LINEAR ELASTICITY THEORY | Abstract |
(Rus) |
| Vshivkov A.N., Iziumova A.Y., Panteleev I.A., Plekhov O.A. | |||
| No 1 (2023) | ГЕНЕРАЦИЯ ПОВЕРХНОСТНЫХ АКУСТИЧЕСКИХ ВОЛН СЕГНЕТОЭЛЕКТРИЧЕСКОЙ ПЛЕНКОЙ BST ПРИ ДЕЙСТВИИ ОДНООСНОЙ НАГРУЗКИ | Abstract |
(Rus) |
| Shirokov1 V.B., Timoshenko P.E., Kalinchuk V.V. | |||
| No 4 (2023) | MODELING OF AXIAL COMPRESSION OF V95/10% SIC ALUMINUM MATRIX COMPOSITE UNDER NON-STATIONARY THERMOMECHANICAL CONDITIONS | Abstract |
(Rus) |
| Kryuchkov D.I., Nesterenko A.V., Zalazinsky A.G. | |||
| No 2 (2023) | DISPERSIONAL DEPENDENCES AND PECULIARITIES OF ENERGY TRANSFER BY FLEXIBLE WAVES IN A BEAM LYING ON A GENERALIZED ELASTIC BASE | Abstract |
(Rus) |
| Erofeev V.I., Lenin A.O., Lisenkova E.E., Tsarev I.S. | |||
| No 1 (2023) | IMPROVEMENT OF THE NON-DESTRUCTIVE METHOD FOR DETERMINING THE MECHANICAL CHARACTERISTICS OF ELEMENTS OF MULTILAYER STRUCTURES ON THE EXAMPLE OF PAVEMENTS | Abstract |
(Rus) |
| Tiraturyan A.N., Lyapin A.A., Uglova E.V. | |||
| No 3 (2023) | NATURAL VIBRATIONS AND HYDROELASTIC STABILITY OF A PLATE WITH A PIEZOELECTRIC ELEMENT CONNECTED TO AN EXTERNAL RL-CIRCUIT | Abstract |
(Rus) |
| Lekomtsev S.V., Matveenko V.P., Senin A.N. | |||
| No 6 (2023) | ALLOY AGING AS A MULTISCALE EFFECT WITHIN THE NANOCOMPOSITE THEORY | Abstract |
(Rus) |
| Golovina N.Y. | |||
| No 2 (2023) | DYNAMIC STABILITY OF A STRAIGHT PIPE CONVEYING PULSATILE FLOW UNDER THERMAL LOADS | Abstract |
(Eng) |
| Lolov D.S., Lilkova-Markova S.V. | |||
| No 4 (2023) | ESTIMATING PARAMETERS OF PERMISSIBLE DEFECTS IN STRUCTURAL FIBERGLASS BASED ON THEORY OF CRITICAL DISTANCES | Abstract |
(Rus) |
| Mullahmetov M.N., Lobanov D.S., Melnikova V.A., Yankin A.S. | |||
| No 2 (2023) | DESCRIPTION OF THE EFFECT OF SOFTENING IN ELASTOMERIC COMPOSITES OBSERVED IN TESTS WITH INCREASING STRAIN AMPLITUDE | Abstract |
(Rus) |
| Kislitsyn V.D., Svistkov A.L., Mokhireva K.A., Shadrin V.V. | |||
| No 1 (2023) | PHENOMENOLOGICAL KINETIC EQUATION OF THE CONVERSION FOR A BINDER OF COMPOSITE MATERIALS BASED ON ISOTHERMAL TESTS | Abstract |
(Rus) |
| Kondyurin A.V., Pestrenin V.M., Pestrenina I.V., Landik L.V. | |||
| No 3 (2023) | NUMERICAL AND EXPERIMENTAL STUDY ON CFRP STRUCTURE OPTIMIZATION FOR COEFFICIENT OF THERMAL EXPANSION | Abstract |
(Rus) |
| Pasechnik K.A., Obvertkin I.V., Vlasov A.Y. | |||
| No 6 (2023) | METHOD FOR CALCULATING SPHERICAL DOMES FOR STRENGTH AND BUCKLING | Abstract |
(Rus) |
| Karpov V.V., Semenov A.A. | |||
| No 2 (2023) | METHOD FOR STUDYING THE POROSITY OF FLUID PHASE SAMPLES BY X-RAY COMPUTED TOMOGRAPHY UNDER UNIAXIAL COMPRESSION | Abstract |
(Rus) |
| Akifyev K.N., Statsenko E.O., Smirnova V.V., Kharin N.V., Bolshakov P.V., Sachenkov O.A. | |||
| No 4 (2023) | BUILT-IN FIBER-OPTIC MECHANOPHOTOLUMINESCENT SENSOR OF COMPLEX DEFORMED STATE FOR MONITORING VIBRATIONS OF POLYMER COMPOSITE STRUCTURES | Abstract |
(Rus) |
| Pan’kov A.A. | |||
| No 2 (2023) | MECHANICAL BEHAVIOR OF POLYURETHANE COMPOSITES WITH NANOSIZED FILLERS | Abstract |
(Rus) |
| Mokhireva K.A., Svistkov A.L., Shadrin V.V., Sokolov A.K., Voznyakovskii A.P., Neverovskaya A.Y. | |||
| No 1 (2023) | ON THE RECONSTRUCTION OF PRESTRESS FIELDS IN A HOLLOW CYLINDER | Abstract |
(Rus) |
| Nedin R.D., Yurov V.O. | |||
| No 3 (2023) | FINITE-STRAIN ELASTIC-PLASTIC TORSION: ANALYTICAL AND FEM MODELING FOR NONMONOTONICALLY HARDENING POLYMERS | Abstract |
(Rus) |
| Sevastyanov G.M., Bormotin K.S. | |||
| No 6 (2023) | NUMERICAL SIMULATION OF THE INTERACTION BETWEEN A WAVE IN HYDROGEN AND A BARRIER IN A MODEL CHANNEL | Abstract |
(Rus) |
| Seregina M.A., Babushkina A.V., Modorskii V.Y., Cherepanov I.E., Mikryukov A.O. | |||
| No 2 (2023) | STRESS-STRAIN STATE DURING DRAFT OF WIDE BANDS WITH SHEAR | Abstract |
(Rus) |
| Ashkeyev Z.A., Andreyachshenko V.A., Nogaev K.A., Bukanov Z.U. | |||
| No 4 (2023) | INVESTIGATION OF THE STABILITY OF FBG SENSOR MEASUREMENTS UNDER VARIOUS CLIMATIC CONDITIONS | Abstract |
(Rus) |
| Serovaev G.S., Kosheleva N.A. | |||
| No 3 (2023) | MACHINE LEARNING METHOD IN ELASTIC PLATE TOPOLOGY OPTIMIZATION PROBLEMS | Abstract |
(Rus) |
| Avdonyushkin D.V., Matveeva A.I., Novokshenov A.D. | |||
| No 1 (2023) | SPECTRAL DYNAMIC STIFFNESS METHOD FOR THE FLUTTER PROBLEM OF COMBINED PLATES | Abstract |
(Rus) |
| Papkov S.O., Papkova Y.I., Pasechnik V.A. | |||
| No 3 (2023) | REGULARITIES OF FATIGUE FAILURE TYPICAL COMPOSITE FLANGE | Abstract |
(Rus) |
| Solomonov D.G., Sazhenkov N.A., Konev I.P., Toropicina A.V., Nikhamkin M.S. | |||
| No 6 (2023) | X-RAY COMPUTED TOMOGRAPHY CHARACTERIZATION OF 3D-PRINTED ACRYLONITRILE BUTADIENE STYRENE AND POLYETHERETHERKETONE COMPOSITES SUBJECTED TO LASER SHOCK PEENING | Abstract |
(Rus) |
| Mubassarova V.A., Panteleev I.A., Plekhov O.A., Iziumova A.Y., Vshivkov A.N., Vindokurov I.V., Tashkinov M.A. | |||
| 1 - 100 of 687 Items | 1 2 3 4 5 6 7 > >> | ||